Cub Cadet Collectors dot com

Hay BBAKER :: YEP wait till you my age it will happen to you to LOL Beer may have something to do with it to LOL

Here is a book I found on another web site,

I got this off of another web site and thought you guy would find it funny.

The one on the right #331 with the long trunk is the male, LOL

Yep it is Hot in Hot Springs, we just went in to a Burn Ban, Thank God. Oh Sh-t is it still O. K. to say Thank God for good things on this
I hope so, I don't want to get kicked of because of what I may have said.

I found this on another site, some good craftsmanship,
http://www.smokstak.com/forum/showthread.php?t=121511

That is one Beautiful truck

I cut the front yard with it and it looks great, so for no problems, I guess I got lucky,

Well as some may know we have a Lot Of Rocks in Arkansas, And keeping blades sharp on you lawn mower here is hard to do. So I came up with another one of my Great idea's, I wasn't sure it would work, but it works better than steel blades. I took off the old blades and cut them down, and then welded ...

Well I have been washing all the pollen off of my toys and thought this wood be a good time to get a picture of all of them toghter, here is a list of them Back roll from left to right 2009 Craftsman, 1951 Farmall Cub, 1953 Ferguson TO-30 Front Left to right 2002 Craftsman, 2004 Cadet LT-1018, Cadet...

I want to send out a Big Thank You to Vince for the help he gave me on 8 April 2013 on two of my Cub Cadets the LT-1018 and on the 104 I got the 1650 running last week, and after talking with Vince and going to town and finding a key for the 104 I got it running, So the Wife is a Little Happyer now ...

Here is the one Jerry Lea and I picked up today, it is a 104, don't run, but looks like it is all there, the seat is a boat seat, http://i1135.photobucket.com/albums/m623/thechiefhtc/DSC09590_zps88a672d9.jpg http://i1135.photobucket.com/albums/m623/thechiefhtc/DSC09595_zps1eee5fd5.jpg http://i1135.p...

Yes some one cut the back out to put on a ball hitch, and I think it was for moving their Boat around, we have three big lakes here, not sure what I will do about that yet, I may put my rototiller on it, and take it off of the craftsman, http://i1135.photobucket.com/albums/m623/thechiefhtc/DSC09562_...

Thanks Jlaws : I have a lot to learn about the older cadets, I have not had a chance to do much to it yet, it had not run in about five years the guy said who gave it to me, I pressure washed it before I put it in the shop, I took the side panels off and remove the gas tank and air filter, it looks ...

What is a QL ??

I picked this up the other day it is a 1650 and I have another old one coming next week, not sure what it is yet, I have a LT 1018 I know that doesn't get me in the club, But I hope the 1650 Gets me in the club, LOL http://i164.photobucket.com/albums/u3/DaveBentz/cubcadet1650010_zpse2adf2ec.jpg http...

If it looks like there is going to be a problem I can turn the tiller around with just a little more welding and drilling, and I may do it anyway just to see if it works better,
so far it is working good,

well I got it done today and it works fine, it took me a little longer than I thought it would but it is built extra strong, and I think I found an old cub cadet not sure what it is are if it runs, the guy wants 200 bucks for it, http://i1135.photobucket.com/albums/m623/thechiefhtc/DSC09543_zpsfcac6...

The idea is to mount my new rototiller to the back of one of my lawn mower so it don't beat me to death. so I came up with a plan, I have an old 12 volt gate opener that still works and it will go in and out about 18 inchs, I don't need it to go that far but I already have it and it will lift about ...

I think the Carneval Cruise Ships are run by Circus Clowns.

Well I guess all you guys have heard about the ship at sea that lost power. I can't believe they didn't have an emergency diesel on board for electrical power. And I cannot believe they didn't have an emergency fire pump supply water for toilets. I think everybody from the captain to the engineer ne...

Your Duck is Dead-- A woman brought a very limp duck into a veterinary surgeon. As she laid her pet on the table, the vet pulled out his stethoscope and listened to the bird's chest. After a moment or two, the vet shook his head and sadly said, "I'm sorry, your duck, Cuddles, has passed away." The d...

To keep you welding rods drive, get an old refrigerator and put a 60 W bulb in it, and that will keep the moisture out of welding rods, any moisture in them will make them run bad

I think this Guy was very lucky

Nice job for your first turning

had this built this summer so I could have more room in the shop,it is 30 X 26 it was build by Carolina Carports, 800-670-4262 they had it up in 4 hours, total price was 4,509.68 this is the third building carport I have had them build for me, they do great work, http://i177.photobucket.com/albums/w...

Vince the next thing you need to get is a milling machine, I have two of them, I have a 1944 index in the big welding shop, and a small off brand I got for $ 1200. bucks from PA. the old index works good ,but to big to put in the small shop, http://i164.photobucket.com/albums/u3/DaveBentz/NewMillins...

Hi to all again: no Mr. Hayes that guitar isn't a Gibson, it is a off brand called Galveston, i do have a 1967 Gibson Blue Ridge, I have 7 guitars now i just got a Yamaha APXT-1N and Case for $ 20.00 bucks, I was thinking it was junk untill i hocked it up to the amp and plays and sounds good, and i ...

Yes Jerry Lea Shares everything with me,except his toys. LOL, and he has a few, http://i164.photobucket.com/albums/u3/DaveBentz/shopjerrytoys014.jpg and he loves to have his picture taken, and he love to play his toys when I play the Guitar, http://i164.photobucket.com/albums/u3/DaveBentz/My64thBirt...

Jerry Lea and I want to Thank you Guys for the Big Welcome