Cub Cadet Collectors dot com

Thank you all for your thoughts. You are all correct that I did not attempt to adjust the bracket up or down. I had not moved the bracket at all to perform the R.H. trunnion seal replacement, and neutral at the lever provided no creep so I figured it was OK as is. I had disconnected both the hydro c...

I searched for this topic and found nothing. I have a suspician this is a common problem. Hopefully I did not overlook something staring me in the face, if so I apologize. I can adjust my hydro linkage to a variety of lengths and the same with the brake link and while I can easily get the brake to r...

Thank you for your reply. Where the free play is measured is likely the source of our confusion here.

Have others here found that in order to obtain a small clearance between the release bearing and release lever a free play of 2 inches or more at the pedal may be required to prevent contact of the release bearing with the release lever?

I'm new here with a 149 and a recently purchased 108. The 108 seller removed the drive shaft for clutch replacement and now nothing of the assembly is usable. Can someone help me with a used drive shaft and clutch assembly? I will happily replace the friction disk or release bearing as required. My ...