Cub Cadet Collectors dot com

I plowed snow with the 105, broke the throttle cable on the 104 just trying to move it from the garage to the barn(wife thinks she needs a car parked in our 3 car garage). I also use the QA 36 snow blower attached to the 149 that i bought from BIGMIke several years ago. I had it all hooked up last y...

Been a while since i posted but glad to say the 149 that i had trouble with the snow blower i got to use for a whole 2 minutes this winter. So today i pulled the blower off and installed a 50 inch deck. it came with a 50 from from the PO, but he hit a stump with it and broke the internal belt so i j...

The blower is up and running. I decided against changing the fan tonight. i figure this summer when i get time i can take the fenders off and power wash the pump and change fluids and oil before mowing season. Anyway the 105 is outfitted with chains and snow plow, and now the 149 is outfitted with a...

The Good news is i have figured out the proper length of lift rod to be 26 inches, I used a radiator clamp and piece of chain to test it out, but that clamps not made for that and the tiny shackle that i have wont fit on the blower end like the pictures above. so now the bad news. as i was testing t...

OK i pulled the tunnel cover off. everything moves i assume the way it should. 2 things i have seen to add here if i put a bolt in the float lock out it will bend the rod when hooked up the the snow blower going down, but i cant even begin to pick up the blower with the lift arm attached. the rock s...

I just put a QA 36 A on my 149 and it wont move off the ground at all. Can someone show me this shear pin to look for in the previous post or some other thoughts. I have hydraulic lift on my tractor so none of the previous pictures show anything out of the orderary to me.I checked fluid and its full...

Kevin,
Looks just like the ones i have bought on ebay. i'm sure its someone around here that makes them. Good job, always nice to have a new tool in the box.

BigMike,
Trust me i would like to buy both, and am trying to work on a way to get another friend of mine to buy it just so it doesnt get awway.

So i could go get the 1450 but instead a 149 came along at the same time so i decided to bring it home. My last experience with the 149 was not good but this is a new begining. i post pictures later as i brought it home in a rain storm, but the features include 50 inch deck, new hydraulic line , 3 p...

Havent been around in a while but i'm getting back into working on my fleet. finally starting to get settled in the new to me house and gotta get the hobby back up and running so i have everything running. I have a chance to purchase a 1450 with what appears factory dual hydraulics, was this a very ...

I bought a used Stihl MS 290 Farm Boss and i'm very happy with it. I dont use it every day but when i need it its a great saw. My advice if using a stihl is read the owners manual if its used go online they will send you a free manual in the mail. Run the highest octane fuel you can buy. If you are ...

Geezer, Glad to hear you were able to fix it. I didnt think it would take too much, but was just not a tractor that i wanted hanging around anymore. I'm glad it has gone to a good home where it can be brought back to life. With the ags that are on it and the power of the 14hp you should have no prob...

Well folks after 4 days of frustration i finally got my 105 running and in the garage. I put in a new 435 cranking amp battery and new positive cable, new fuel line, dumped liquid heat in the tank plus some new high octane fuel, and dumped fuel directly in the carburetor, and finally hooked up a new...

Daryl Glad to hear your cubs are doing well in the snow. i get envious living accross from a toro dealer after days like today. I havent been cubbing much accept for tilling a couple gardens a month ago. I purchased a Honda Foreman this spring and now I cant get it running so therefore its taking up...