Cub Cadet Collectors dot com

Sorry for the delay fellas...... Been really busy here and things are looking up although we still have folks sleeping on the ground!. Supplies are stocked heavily but a few things are in shortage but being dealt with!. I cant thank those of you who helped, prayed, and thought of us during this time...

We were out of harms way. Everything east of Charleston WV got hit pretty hard!. Rhonda wwent up for the day and helped out and i will be somewhere helping as soon as I am back from working out of town!. Supplies are pouring in but there is sooo much more needed!. Thank You Everybody for helping and...

Howdy friends. I'm fine but lots of the mountain folks have lost everything including homes and lives. Its bad here!. I'm reaching out to all my brethren here to help us if you can. I dont know where to start but red cross, united way, all fire stations. Greens feed and seed in charleston wv has a c...

I firedup the 982 yesterday and started too move forwards.....it is whining more than usual and was jerky moving forward......I drove it across the yard and smothed right out....so I put it back on the driveway and hooked up the tiller too the 3 pt., it wouldnt hardly lift the tiller...still whining...

Hey now!...we resemble that!!!.

There is also 3 different pulley sizes offered by IH.....The smaller the pulley, the slower the speed but greater the power.....largest pulley will be a lot more belt speed with a little less power. Now I'm not sure what size pulley I'm running and I'm not sure if the largest pulley will fit the tra...

Nope.....just unbolt the flange on the back of the tractor, get some slightly longer 3/8" bolts, and bolt the gearbox right on!. Nothing else needed!. The cub cadets turn backwards too a regular tractor so the pulley will turn opposite, but other than that......they work great!. Also, they turn a lo...

Re-adjust the point.....start at .020 but leave the screw just a little loose....now then with the engine running, adjust the point by ear until the blubber goes away and you hear the engine smooth out!. Get it as good as you can and tighten the screw without moving anything!. Now run the engine wid...

I'm at a loss for words. Jeff was a great guy and spent many hours talking tractors and everything else with us. Although we dont see each other enough, I still feel we are family and the loss of a member is tough. Prayers from the Woodrum family are with the Piersons tonite.

After further testing of this method and cleaning a ton of parts....I've made and important discovery!. Vinegar will eat up aluminum allow. Vinegar will also destroy spring steel!. I had an L.S. Starrett Divider soaking as Rhonda had brought one home in a box of rummage sale junk tools and they were...

Here's a pic. of what I done so far......only took about 30 minutes too do all these!.

Hey gang..... Been tinkering around with some new tools this winter and some of the tooling was rusty. So I decided there had too be a better way than wire wheeling, sanding, electrolysis, or buying de-rust which costs lots of money. I wanted something simple that would work on its own. My answer wa...

Well...here's one of it sitting in the front yard!. I havent done anthing too it other than get it running too make sure the engine was good, and I changed out the hydro filter and checked the fluid and rear. Hopefully, by this time next year it will have a total tranformation too a optioned out uni...

Hi Geezer!
I got lucky on mine!....I won a couple of hydro filters as door prizes at one of the plow days....they've been sitting on the shelf for a while now but was exactly the right one for this tractor!. So what's this tell us?????....NEVER throw anything away!!!!!.

After tinkering around and getting the 982 running after I got it home, the hydro rear wouldnt work. Everything turned but no forward, reverse. I simply changed out the filter and she works perfectly now!. So if this filter which had new looking hytran and looked clean, was stopped up this much, the...

Dump some Marvel Mystery Oil in the fuel tank at every fillup.......the exhaust vavle is getting hot and sticking!. I've had lots of mowing tractors do this when they get hot....always same scenario!. MMO will cure the problems about every time!.

Vince.... New Lodge in the near future with a lot more tractor stuff too do also!. We're movin on up in the world, might have a place too take a shower and real indoor plumbin! Gonna be a big ole covered bridge over the creek that will be 20' wide too!.....we'll use it for a picnic shelter when not ...

Howdy gang!. Well I got the 982 home and she's in pretty good shape!. I bought it not running with unknown issues!. Happy too say that the engine is now running fine, but the reason the person got rid of it was the rearend quit moving forward/backward. Found the problem within 10 minutes and fixed i...

BigMike wrote:and think of all the hours Scott has on him

Yeah.....I would imagine his plug is about carboned up by now too! Lol.

Geez dude.....why throw that plug away?.....clean it up, weld up the electrode, good as new!.

Hey gang..... Been away working a while and farming....not as much time anymore as I used too have on the puter. I sure miss everyone and coming too plow days but looks like another 3 years and things will slow down a bit and I can enjoy life a little more......We're in the process of planning to bu...

I'd prolly just opt for a set of used lines from Ray or ????.......hydraulic lines is something you dont normally make and by the time you buy the tool, you could prolly buy the lines. I used too think that anything I could do myself would save me money......now I look around at all the tools I have...

Scott.....I think we can fit that piston in a K Series.

Possum Lodge is still alive and kickin......although we have been pretty busy with the new farm and everything, we're planning a work party up there soon too catch things up a bit! I actually just brought the Loadstar home and its now parked on my driveway waiting on completion of the refurbish! Got...

Well folks....I'm right in the middle of this one. Just pulled into the motel at Hampton Va and the rain and wind is straight sideways....no damage anywhere yet and the power, internet, and cell service is all still working.....we'll see what overnight brings!.

Cal....that's the exact truck that I'm restoring right now! Right down too the color!. I'm putting the original flatbed back on it but it will tilt when we're done......I almost opted for rollback bed but there just too pricey too find in decent shape!. I figure with the hydraulic tilt and a couple ...

Howdy boyz!!!! I thought I'd drop in and make sure everyone is still alive.....sorry we couldnt make it too plow day this year but I've got the kidney stone thing going on and didnt want too chance the trip.......going down today and have them zapped I hope!!! Anyway.....things are going well here a...

Actually Possum Lodge is still there and doing great!
We finally sat down at home one night and named the new farm........T@R Farm (yep...Tony And Rhonda's farm)!.

Howdy boys.....and girls..... Well.....things are rollin right along here and I owe everyone a huge appologie for dropping out of sight for a while. We've bought a farm...most of you knew that. We've been working on the farm getting things all squared away too start building some buildings and a bar...

Happy Thanksgiving Geezer and everyone......I hope yours had been as good as mine so far...kinda hard too beat a new grandbaby for thanksgiving!!! And a nice deer for the table also. I sure miss everyone and wish we had about a 2 week plowday coming up. The new job has really taken its toll on my cu...

Pics. forthcoming but Miss Kollyn Renee Eastham entered this world today at 3:45 p.m. a kickin and a hollerin!!!!!!! 8 lbs. and 2 oz. at 2 weeks early. Both her and Mom are doing great!!!!!!!!!

I guess this is the first stage of becoming an "old fart"????.