Cub Cadet Collectors dot com

My 1872 the day I got it and a couple mounths after.

Ray . Dose the tiller have any paper work on it ? Any idea what it cost new ? I've got the same tiller with a Sears tag on it.

Tim I believe there was a post by (Ismurphy) Scott Murphy back in Mar 26 2011. The post was started by ( vince_o ) If you can look that up there is a lot of good info and pictures . I found all the parts at suplus center ,and cub stuff that I had layin around . Be sure to post some pictures of your ...

Ken there is a lot of good advise here, just one more thing . Be sure to clamp things down or use a good vise on your drill press. A piece of steel with sharp edges sping at 500 RPM can ruin your day .

I don't care who you are that is funny .

I am repowering a 582 with a 20hp comand . I have a motor plate out of a 1864-63 and a cast iron tranny . Dose anyone know what size the spacers are between the motor and the motor plate to line up with the tranny properly ? If I'm doing it I'm sure it has been done before . Thanks Bruce S.

Hi guys, I am going to repower a 582 with a 20hp comand . I have a motor plate out of a 1863 cub and a cast iron tranny . What size of spacers do I need between the motor and the motor plate ? Im sure someone has done this before . Any advice on this project will be well taken .Thanks Bruce S.

Here's a picture of my son pullin his stock alterd about 8 years ago .

I'm thinking of buying a set of 10.50 firestones from Miller Tire . Dose any one have pictures of them mounted on their tractors ? What are the pros and cons on them? Thanks Bruce S.

Matt how about putting a iron tranny pump on a SGT alum rear end ?

Now thats what I'm talkin about . Thanks Scott I will keep track of it this time .

I'll go with a comand , it would be easier to get put in . I will proubly have C Vogal regrind a cam . Bruce S.

Scott nice job looks good . Now how about some details on the pump output , what is the valve bolted to the battery box , line sizes , were did you buy the parts maybe some part numbers ?

Todd I have thought about a geo engine . I could use a belt driven governor off of a combine . I'm not sure what I would do for the fuel injection.

I maybe opening a can of worms here but , I 'm building a cub with mainly ground engaging implaments in mind . It will be some thing like a superGT with hydro lift an manual tranny . My question is , do I want to use a 20H.P. comand or a 20H.P. mag for a motor ? Thanks in advance Bruce S. :beer:

Tom That is the email I have in my contacts for Andrew . Try (641)774-2217 , That is the number listed in the phone book. Hope this helps Bruce S.