Cub Cadet Collectors dot com

I have a 451 on my 2082, It works great and I want to sell it. I have no idea how to off load it and I'm looking for ideas. Also not sure what a reasonable asking price is ($400?), I replaced the plastic chute last year. Craigslist is nothing but spammers and I don't (won't) have facebook for the ma...

So I finally bought a new and much bigger tractor. I think it is time to unload the 2082. Looking for a little guidance on what a reasonable asking $ is and where I should try and sell it. Tractor: It looks used but runs well. It still needs some work to be working 'good' (brakes primarily need to b...

I bought the after market...its been a year and it has been working fine. New problem, the Charge pump check valves are both weeping hydro fluid through the top weep holes. Not sure the function of the check valve but for both of them to go at the same time seems odd. I'm wondering if I have some so...

I finally figured it out. The drive pulley on the snowblower (9 incher) was deformed. What happened was over the years the drive pulley, when lowered, would make contact with the idler puller. It deformed the drive pulley with such consistency I thought it was manufactured that way. The V was folded...

Last thing before I modify. The 9inch drive pulley on the snowblower seems odd. When installed, the rim closest to the tractor has a folded over lip in the inner race, Where the belt rides, this appears to be manufactured that way (because the lip is so consistent). However this could explain a lot ...

I am done with the belts. Followed all of the advice and prior to this snow season did the following: Purchased a new idler and tension pulley (OEM), purchased a new tensioner spring (OEM). I also installed a new electric PTO this summer since mine fried when my stator died. So it also has an after ...

Wow...thanks for all the great info. Really give a good history. I feel like I have a clue now. So as mentioned it has the Kohler 20HP. My PTO clutch just went tits up tonight. Bearings are fried and the magnet is completely delaminated....seems like time for a new one. Part number 717-3340 later re...

Wow...thanks for all the great info. Really give a good history. I feel like I have a clue now.

Thanks
Nate

All done, she is back together and sounds much better, runs smoother and starts easier. I put the xtreme motorworks 3 pt hitch on it too....super siked to grade the driveway.

Tore it down all the way. Bearings look good so I will reuse. All oil seals, valves, valve springs and gaskets will be replaced. The compression was good so I'm going to keep the oring (new orings are expensive for this badboy). Ill let you know how it runs when I'm done.

Thanks
Nate

So....I tore down the engine to do a valve job. I also had an oil leak I couldn't identify so I purchased the M20 gasket kit, which comes with oil seals, from iSaveTractors (that guy is great). Anyway...due to some bad cleanliness practices I believe I have some contaminants in the crankshaft compar...

Alright...here is a silly question-
What "series" tractor is the 2082? Is it an 82 series? That seems like it would make sense.

Thanks

Im pretty happy with my 2082 but man is a pain to work on the engine stuff...nothing is easy to get to.

I think it is the idler and tensioner pulley. I think the belt is sitting way to deep and both pulleys which actually increase the horizontal distance between the idler and tensioner and the snowblower drive pulley. I believe this is resulting in not only the 90 degree twist in the belt between pull...

Well, I picked up the OEM belt from a local dealer. First impressions were it is much more sturdy. I blew 10-12" of snow yesterday for over an hour with no issues. Thanks for the advice. Spoke to soon....I didn't just shread the belt...I ripped it to pieces. I'm throwing my hands up...bringing to th...

Well, I certainly agree with this plan, in fact...I think its a great plan. Not sure the wife is going to be on board though. However, she has agreed that when she goes back to work I can get a new tractor, probably a compact with a loader and bucket. thats a few years off though. Not sure which bra...

:beer: I never introduced myself so here goes... Names Nate, live near Saratoga Springs, NY with my my wife and three children. We've got a nice place and 5 acres so the Cub Cadet 2082 I bought in 2016 really helps. I picked up the tractor, 54" mower deck, 551 snowthrower and 17cuft trailer for $170...

The info on the 551 and SGT's is great...but I'm missing one prime piece, what size belt to use? I have the 551 snowthrower attached to a 2082 with the 6inch PTO pulley. The gear ratios seem correct as this setup really chucks the snow when its working properly. The problem is...I shred belts quickl...

Indeed...tanks for all the help!

I went into the fuel tank on the suggestions above. Im embarrased to say the fix was as simple as blowing out the crap that was stuck in the two shotoff valves attached to the gas tank. I guess the good of it is I know the tractor inside and out now....thanks for the help...shes running nice and cut...

All right guys...I need some serious help. The engine spec number is 49623 and its on my Cub 2082. Its original and I dont know how many hours are on it because hour meter doesnt work. It stopped working with ~800 hours on it. Problem Statement: Tractor starts fine, runs for 4-7 mins fine, when PTO ...

Next question:
I have a dirt/gravel driveway thats pretty long. Rather than paying someone twice a year to grate it is there an attachment that will work for grating the driveway?

I manufactured the the lifter arm. I measured the drawing and scaled it up based on the shaft measurement on the tractor. It seems to fit well and everything has good clearance. I made it with 1/2" steel plate and did some weld build up where the bolts go through. Ill post a pic soon. Thanks again f...

Well...I am stubborn and I just heard....challenge....off to fabricate the lift bracket!

Wow...Great background info to start off with. Thanks a bunch and stretch those fingers. A little disheartend to hear about the rear PTO and price but I really bought the the SGT for the lawn and snow here in upstate NY. Im really looking forward to using the snow thrower this season. It ought to be...

Looks Great!

Can you go into any detail about welding the holes. I have the same deck with 3 small holes. I have a stick welder but im worried in going to blow holes in the deck.

To anyone who can help. I searched the site but for the 164 related posts associated with searching "2082", I can't seem to find the answer for the questions I have so sorry if this is repeat (first time user) Background: I purchased a 2082 a few months back with the intent on using it around the pr...