Search found 99 matches

by Tim DeLooza
Thu Dec 03, 2015 7:51 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 1650 Muffler
Replies: 7
Views: 5863

Re: 1650 Muffler

Paul, I have both on several of my quiet lines. I prefer the look of behind the grill but the longer ones coming threw the grill are more practical, they never seem to line up with the hole in the grill though.
by Tim DeLooza
Thu Nov 19, 2015 7:57 pm
Forum: CCC and MTD Built Cub cadets
Topic: 1862/450 Lift Bracket
Replies: 2
Views: 3342

1862/450 Lift Bracket

I have an early 1862 that I would like to put a 450 thrower on and I think I need this bracket (AF). Does any one have some dimensions or a tracing they would be willing to share or send me?
lift bracket adapter 2.jpg
lift bracket adapter 2.jpg (43.5 KiB) Viewed 1828 times
by Tim DeLooza
Thu Jun 04, 2015 8:27 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: End of an Era.
Replies: 11
Views: 8452

Re: End of an Era.

I like the weights too. ;)

Skott, I bought a Cub Cadet Yanmar EX3200 when they first started there joint venture and have been very happy with it. Only real complaint is they're not a joint venture any more.
by Tim DeLooza
Tue Jun 02, 2015 5:59 am
Forum: CCC and MTD Built Cub cadets
Topic: 1862 power steering
Replies: 2
Views: 3471

1862 power steering

I have an 1862 that started leaking oil out of the top of the steering column. I got a new face seal (22) and it fits over the seal spacer (24) but the spacer is loose on the input shaft (26). My question is how tight is it supposed to be? Was it originally a press fit so fluid wouldn't leak by, or ...
by Tim DeLooza
Tue Dec 30, 2014 6:45 am
Forum: CCC and MTD Built Cub cadets
Topic: 1440 Lift Bracket
Replies: 15
Views: 11494

Re: 1440 Lift Bracket

Thanks guys for the help. I did make mine out of ¾ stock like you suggested and I made the “ears” a little fatter. The inside also has to be a little bigger because it goes around the lift handle. I haven’t heard any complaints yet so it must still be working.

Thanks again.
by Tim DeLooza
Sun Nov 30, 2014 7:43 am
Forum: CCC and MTD Built Cub cadets
Topic: 1440 Lift Bracket
Replies: 15
Views: 11494

Re: 1440 Lift Bracket

Thanks Tim and Steve. How thick is the "arm" portion (looks about 3/8" or 1/2") and the part the bolts go threw?
by Tim DeLooza
Sat Nov 29, 2014 1:38 pm
Forum: CCC and MTD Built Cub cadets
Topic: 1440 Lift Bracket
Replies: 15
Views: 11494

1440 Lift Bracket

Does anyone have, or can get me some dimentions of this (#13) lift bracket? Im sure its the same as the hydraulic lift version but with the piece cut out of the top. I need to make one. Thanks.
1440 lift.jpg
1440 lift.jpg (14.6 KiB) Viewed 7341 times
by Tim DeLooza
Sun Aug 31, 2014 11:28 am
Forum: Cub Cadets and Shooting the Breeze
Topic: H42 or H48 snow thrower
Replies: 2
Views: 2962

H42 or H48 snow thrower

Does anyone in cubbie land have a H42 or H48 snow thrower they can get me some pictures of? Possibly on a tractor or of the thrower and the mounts.

Thanks.
by Tim DeLooza
Tue May 13, 2014 7:27 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Optional Cigarette Lighters
Replies: 1
Views: 2244

Re: Optional Cigarette Lighters

Bryan, The only lighter I recall seeing in any literature is the black knobbed version you pictured below. That being said I have also seen one like you have, and in a 169 too.
lighter.jpg
lighter.jpg (43.17 KiB) Viewed 1375 times
169lighter.jpg
169lighter.jpg (30.43 KiB) Viewed 1375 times
by Tim DeLooza
Wed May 07, 2014 3:47 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 1914 (982) repower
Replies: 3
Views: 3261

Re: 1914 (982) repower

I don’t remember how long the difference was (one of those should have taken pictures while I was doing it projects) but maybe Midwest has a driver or spacer that could make up the difference at the engine end.
by Tim DeLooza
Tue May 06, 2014 8:28 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 1914 (982) repower
Replies: 3
Views: 3261

Re: 1914 (982) repower

Joe, I don’t see why it wouldn’t work. I put a Command in a 2072, which is a similar modification. I made a new wiring harness from scratch because I wanted it to look right, and factory. I used the stock flex disk set up like your 1914 has too and made a drive shaft that was long enough. It was a p...
by Tim DeLooza
Mon Apr 28, 2014 9:06 pm
Forum: CCC and MTD Built Cub cadets
Topic: 1862 3 point
Replies: 3
Views: 3612

Re: 1862 3 point

ONLY cat 0???
18623pt.jpg
18623pt.jpg (34.13 KiB) Viewed 2244 times
by Tim DeLooza
Tue Mar 04, 2014 7:57 pm
Forum: CCC and MTD Built Cub cadets
Topic: proper operating temp for diesel
Replies: 2
Views: 2945

Re: proper operating temp for diesel

Charles, I don’t know if there’s a spec in any of the manuals but the Kubota D-600 that I put in my 1650D runs in the 220 range according to this gauge.
by Tim DeLooza
Sun Feb 23, 2014 7:23 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Danco rd 1025 loader
Replies: 9
Views: 6554

Re: Danco rd 1025 loader

Scott, I think finding a replacement is going to be close to impossible (but I hope some one proves me wrong). It looks like the pump body is aluminum? Can it be welded then remachined to repair the pump you have?
by Tim DeLooza
Sun Feb 23, 2014 7:17 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Little projects
Replies: 3
Views: 3300

Little projects

I’m still here, more of a lurker any more, but anyway… I’ve had a chance lately to catch up on some smaller projects of my own. Made a makeshift paint booth in the garage today and did some painting on some wheels that I’ve been working on. The booth did OK but theirs room for improvement. paintwhee...
by Tim DeLooza
Thu Feb 13, 2014 10:14 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Original with Cub Low Boy rear wheels
Replies: 7
Views: 4761

Re: Original with Cub Low Boy rear wheels

Geezer, here's a few, how many more do you want?
dsc02238.jpg
dsc02238.jpg (150.99 KiB) Viewed 3470 times
dsc02239.jpg
dsc02239.jpg (147.74 KiB) Viewed 3470 times
by Tim DeLooza
Fri Jan 17, 2014 4:46 pm
Forum: Custom Corner
Topic: Gear drive Hydraulics
Replies: 19
Views: 31769

Re: Gear drive Hydraulics

Dustin, No, sadly it’s still in the same mess of a corner that it has been sitting for the past year and a half.
engstand.jpg
engstand.jpg (43.08 KiB) Viewed 11260 times
by Tim DeLooza
Thu Nov 22, 2012 5:56 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 3rd hydraulic circuit-anyone added one to a QL?
Replies: 9
Views: 9887

Re: 3rd hydraulic circuit-anyone added one to a QL?

Charles, Neatest way would be to find a 3 spool valve like Dave said. A JD 140 H3 would have that kind of valve and if I remember right one spool had a float lock position. I’m not sure what, if any other Deere’s had a three spool valve. Another option is to use the “stackable” valves from a newer C...
by Tim DeLooza
Sat Nov 17, 2012 4:50 pm
Forum: Pullers
Topic: 30mm axles
Replies: 2
Views: 6298

30mm axles

Does any one know the preferred part number for the bearings and seals when boring out cast axle housings for 30mm axles?
by Tim DeLooza
Mon Nov 05, 2012 7:02 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 1650 -broken cooling fan/iso mounts?
Replies: 53
Views: 58146

Re: 1650 -broken cooling fan/iso mounts?

Eric, Sure the cradle and mounts being gone like yours are could make it harder to get the oil pan bolts out. You could also find that they’re not even there any more (got loose and vibrated out). Ether way a regular combination wrench probably isn’t going to work to get the front two out.
by Tim DeLooza
Sun Nov 04, 2012 10:22 am
Forum: Cub Cadets and Shooting the Breeze
Topic: 1650 -broken cooling fan/iso mounts?
Replies: 53
Views: 58146

Re: 1650 -broken cooling fan/iso mounts?

Eric, Yes, there is supposed to be four rubber mounts like what was on the topside of the cradle on the bottom. What your picture shows is common, the rubber splits/cracks and falls out. I think it is going to be easiest for you to pull the engine with out the cradle rails attached. There are (or is...
by Tim DeLooza
Sat Oct 06, 2012 6:38 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Power Steering on a Quiet Line?
Replies: 7
Views: 7810

Re: Power Steering on a Quiet Line?

Todd, They're not THAT expencive...

http://www.summitracing.com/parts/SUM-900311/

The benders on the other hand... :roll:
by Tim DeLooza
Thu Oct 04, 2012 8:41 pm
Forum: CCC and MTD Built Cub cadets
Topic: It happened again
Replies: 14
Views: 10096

Re: It happened again

I thought it looked like there used to be weights on those wheels! :D
by Tim DeLooza
Mon Sep 17, 2012 6:58 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: rod extenion
Replies: 7
Views: 4919

Re: rod extenion

Kenneth is quicker than I am tonight. Measured like this I get 2.170”
10hproddipper 2.170.jpg
by Tim DeLooza
Sun Sep 16, 2012 9:09 am
Forum: Cub Cadets and Shooting the Breeze
Topic: How’d they do it? Hydraulic lines.
Replies: 5
Views: 3998

Re: How’d they do it? Hydraulic lines.

Todd, Thanks, and yes I have a 37* flare on all the ends. Kenneth, That goes along with what I was thinking even though I haven’t ever seen a machine like that work. I did a little searching and watch a video on youtube about the dies being driven. That makes sense too. If I could drive/roll the out...
by Tim DeLooza
Sat Sep 15, 2012 6:41 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 44" Deck Pulley
Replies: 5
Views: 4053

Re: 44" Deck Pulley

Jonathan, Michael is correct, the smaller pulley on the deck helps to increase the blade speed and it helps them to cut better.
by Tim DeLooza
Sat Sep 15, 2012 6:38 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: How’d they do it? Hydraulic lines.
Replies: 5
Views: 3998

How’d they do it? Hydraulic lines.

A recent project of mine has been putting dual hydraulics on a 1450. I decided since I have lots of single spool valves and dual spool’s are spendy and harder to get, that I would plumb in two singles. I mounted one on the side of the dash similar to the 1x9s and I moved the standard QL steering col...
by Tim DeLooza
Thu Sep 13, 2012 4:53 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 44" Deck Pulley
Replies: 5
Views: 4053

44" Deck Pulley

I’ve got a 44” deck for a QL that I would like to put the small drive pulley on but I’m not sure which part number is the right one. I think it is 126393C1 but also listed is 59703C2. Any one know for sure which number is the smaller pulley?
by Tim DeLooza
Sat Aug 18, 2012 9:30 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Correct width front rims for a 100?
Replies: 11
Views: 9834

Re: Correct width front rims for a 100?

I’d say the smooth wide front tires like yours has on it are what it would have come with. The picture I posted was likely a stock IH picture that the art department modified to make them look a little wider. IH’s art department has modified several pictures in different literature to make it look m...