Search found 36 matches
- Sun Apr 28, 2013 1:31 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: 1200 oil leak
- Replies: 3
- Views: 3122
Re: 1200 oil leak
Check your governor shaft & link arm. Make sure the clamping bolt is tight and the governor shaft is properly adjuster (per the manual). If your breather is clogged, it could be that the brass bushing is leaking oil and caused the shaft to spin loose. I'm actually working on a similar problem (for ...
- Fri Apr 26, 2013 11:08 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: 1200 oil leak
- Replies: 3
- Views: 3122
1200 oil leak
I was cutting grass yesterday. The 1200 was running fine. It all of sudden the engine revved up more that what it was set on the throttle control. I throttled it back down and finished cutting the grass. I noticed when I pulled it into the shed it had started leaking oil. It was still running fine. ...
- Mon Mar 11, 2013 7:17 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Tiller Belt alinment
- Replies: 0
- Views: 2181
Tiller Belt alinment
I have installed a 1A tiller on my 1200. The problem that I have is the belt from the right angle gear box does not line up with the tiller which causes the belt come off. Is there any adjustment for lining up the belt?
- Thu Feb 28, 2013 11:25 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Tiller gearbox
- Replies: 2
- Views: 2588
Re: Tiller gearbox
3:2 For the Tiller gear box is correct.JMotuzick wrote:Joe
Sorry, no the gear ratio is diffrent. I believe the snowblower is 2:1 and the tiller is 3:2 but I could be wrong... Either way they are diffrent.
- Wed Feb 27, 2013 11:30 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: look what's following me home
- Replies: 11
- Views: 7083
Re: look what's following me home
Very nice
- Sat Jan 12, 2013 2:15 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Front axle
- Replies: 5
- Views: 4527
Re: Front axle
mgonitzke :
I think I am going to get the whole 582 frame and see if the axle and drag link will fit. thanks for the information.
I think I am going to get the whole 582 frame and see if the axle and drag link will fit. thanks for the information.
- Sat Jan 12, 2013 11:21 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Front axle
- Replies: 5
- Views: 4527
Re: Front axle
ksanders:
Ifyou get a chance to measure one. I know where I can get one from a 582 about a half hour from me.
Ifyou get a chance to measure one. I know where I can get one from a 582 about a half hour from me.
- Fri Jan 11, 2013 11:24 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Front axle
- Replies: 5
- Views: 4527
Front axle
Is there any difference with the front axle from a 82 series to older Cub Cadet A friend of mine had the front axle to break on what I think is a 127
- Mon Dec 10, 2012 9:36 pm
- Forum: The Coffee Shop
- Topic: Down For The Count
- Replies: 21
- Views: 16921
Re: Down For The Count
Ray:
Wishing you well and a speedy Recovery
Wishing you well and a speedy Recovery
- Tue Nov 06, 2012 11:09 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Need Tiller Information
- Replies: 1
- Views: 2196
Need Tiller Information
What is the Diameter of the bottom pulley that goes on the Right angle drive
What lenght Mule drive belt would I need for this 1A Tiller to mount on my 1200
What lenght Mule drive belt would I need for this 1A Tiller to mount on my 1200
- Tue Nov 06, 2012 11:13 am
- Forum: The Coffee Shop
- Topic: Nov. 6, 2012
- Replies: 0
- Views: 2166
Nov. 6, 2012
VOTE TODAY
- Sat Nov 03, 2012 9:51 pm
- Forum: The Coffee Shop
- Topic: Brinly plows
- Replies: 10
- Views: 8135
Re: Brinly plows
Is this the type plow you have
I bought this at a Yard Sale about 12 years ago. Along with a single gang disc and a Brinley Cultivator for the amazing price of $50.oo for all three.
- Mon Oct 29, 2012 3:02 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Balance gears?
- Replies: 15
- Views: 10180
Re: Balance gears?
The Motor that I have in my 1200 is:
12 HP
Serial # 7176178
Model# K301AQS
Spec. # 47541d
Does this have Balance gears
12 HP
Serial # 7176178
Model# K301AQS
Spec. # 47541d
Does this have Balance gears
- Mon Oct 29, 2012 12:35 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Balance gears?
- Replies: 15
- Views: 10180
Re: Balance gears?
Why were the Balance gears even installed :?: Should I remove the Balance gears in my 1200 :?: I wish I had read these post before I put my 1200 back together. I even had the oil pan off the engine when I first started the rebuild. Then I added the cross bar to the engine mount. Are there any Instru...
- Sun Oct 21, 2012 10:16 pm
- Forum: CCC and MTD Built Cub cadets
- Topic: 1250
- Replies: 5
- Views: 4786
Re: 1250
Is this what U'all looking for:
- Sun Oct 21, 2012 10:47 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: John D's 9th Annual Tractor gathering
- Replies: 3
- Views: 2980
Re: John D's 9th Annual Tractor gathering
Nice collection of Tractors.
The outlet on My 1200 also rotates. No Leaks
The outlet on My 1200 also rotates. No Leaks
- Fri Oct 19, 2012 8:45 am
- Forum: Custom Corner
- Topic: 1200 cub Cadet
- Replies: 3
- Views: 6608
Re: 1200 cub Cadet
jparkard56:
This is information from the ihcubcadet.com/BobsPage/
This is David Kirk's Plans:
I made mine out of Stainless steel.
This is information from the ihcubcadet.com/BobsPage/
This is David Kirk's Plans:
I made mine out of Stainless steel.
- Fri Oct 19, 2012 12:59 am
- Forum: Custom Corner
- Topic: 1200 cub Cadet
- Replies: 3
- Views: 6608
Re: 1200 cub Cadet
More pic of the 1200
- Fri Oct 19, 2012 12:55 am
- Forum: Custom Corner
- Topic: 1200 cub Cadet
- Replies: 3
- Views: 6608
1200 cub Cadet
I have Finished my 1200 after more than 10 years
- Tue Oct 16, 2012 11:07 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: What did you do with your cub today?
- Replies: 96
- Views: 156965
Re: What did you do with your cub today?
Worked on putting the 1200 together. Mounted the front end, Headlights and the hood. I have to tweak the tunnel cover to get it lined up so the Creeper shift lever ingages in the proper location.
Pictures will be coming out in the next few days
Pictures will be coming out in the next few days
- Sun Sep 16, 2012 4:23 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Questions about a 1200
- Replies: 2
- Views: 2427
Re: Questions about a 1200
1. My 1975 1200QL fuel valve is leaking by. Took it apart. Is there an O ring surpose to be on the end of the valve or not :?: Mine does not have an O ring. 2. My 1200 has not run in 10 years because I did a rebuild the tractor. I am in the final stages of putting it back together. I have rotated t...
- Sat Sep 15, 2012 10:46 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Questions about a 1200
- Replies: 2
- Views: 2427
Questions about a 1200
1. My 1975 1200QL fuel valve is leaking by. Took it apart. Is there an O ring surpose to be on the end of the valve or not :?: Mine does not have an O ring. 2. My 1200 has not run in 10 years because I did a rebuild the tractor. I am in the final stages of putting it back together. I have rotated th...
- Fri Sep 14, 2012 11:18 am
- Forum: The Coffee Shop
- Topic: Ray Weaver!
- Replies: 4
- Views: 4053
Re: Ray Weaver!
HAPPY BIRTHDAY TO RAY WEAVER
- Tue Sep 11, 2012 8:38 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: 9//11/01
- Replies: 5
- Views: 4009
9//11/01
LET US NOT FORGET 9/11/01
- Mon Sep 10, 2012 10:29 pm
- Forum: Toys for the Big Boys.... uh, Collectors
- Topic: My Collection
- Replies: 7
- Views: 11655
Re: My Collection
That is one Awesome Collection
- Mon Sep 10, 2012 12:54 am
- Forum: CCC and MTD Built Cub cadets
- Topic: LTX1045 Deck Removeal
- Replies: 5
- Views: 4785
Re: LTX1045 Deck Removeal
I try it one more time. I had removed the pin but i could not get the black plastic that the pin was in out of the bracket on the mower deck. What am i doing wrong
- Wed Sep 05, 2012 9:05 pm
- Forum: CCC and MTD Built Cub cadets
- Topic: LTX1045 Deck Removeal
- Replies: 5
- Views: 4785
LTX1045 Deck Removeal
I have a Hydrostatic LTX1045 Model # 13AX91AT056 with a 46" Mower Deck. The manual says remove belt guide, unhook front stabilizer rod and unhook left and right deck support pin from deck lift arms. The problem is: The manual does not say any thing about How do you unhook the cable that engages the ...
- Tue Sep 04, 2012 10:55 pm
- Forum: The Coffee Shop
- Topic: Any one seen one of these?
- Replies: 3
- Views: 3757
Re: Any one seen one of these?
The Fire dept. I was with use to have one. That one was a 110 volt model.
Go on the internet and do a Search for "jacobson military generator".
Go on the internet and do a Search for "jacobson military generator".
- Tue Sep 04, 2012 12:03 pm
- Forum: The Coffee Shop
- Topic: Any one seen one of these?
- Replies: 3
- Views: 3757
Re: Any one seen one of these?
There were four of these little generators. PE-162, PE-210, PE-214 and Navy EF-n. Outputs were as follows: PE-162 6.3 and 500 VDC PE-210 6-22 VDC 0-30A PE-214 115/230 or 120/240VAC 300 VA EF 12.6 and 500 VDC The base models (except that I'm not sure about the EF) had no tubular carrying frame around...
- Sat Aug 25, 2012 8:11 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: QA 42 Snow Thrower Restoration
- Replies: 26
- Views: 23965
Re: QA 42 Snow Thrower Restoration
That is one nice looking Snow Thrower.