Cub Cadet Collectors dot com

Those plug dipsticks would be a pain To check the oil between the frame rails on the 70/100

That's the way most of the weather guessers are Paul...I bet Noreen is can't wait till Monday to get her 8".......... of snow

Nice looking 1210 Vince.
Too bad it it doesn't have hydro lift...then it it would be a 1211

Looks like you are loosing some weight and got a makeover too.

The cam cover is a more than likely scenario that is has balance gears in it so drilling a hole in the block to intall it is going to chew up the dipstick...unless you remove said gears.I had a 147 with the short dipstick fill hole tube on top of the block,after I removed the gears the long dipstick...

Well it looks like 50 years took its toll on it Scott.
Where does one begin to look for such a thing.

Watch out for Nick he has a way of getting your cubs from you...

Scott,
Just put a little dab of jb weld in there and you will be fine.

Gotta come see you some day.

There is suppose to be a solid pin in there not a spirol pin,though your new setup looks like it will work.

Here is my snow load.Used the 42" thrower on the 123.Before this last snowfall I was using the blade till I had no where to put it.

I will be there...

looka lika dis one.
But only one is used.

I think you should find the source of the fumes.possibly a leak on one of the cubs.

So Paul are in sync with the gopher? Six more weeks of this winter white stuff?

I saw that on cl, I didn't have the heart to steal it from you Joe.If you remove the oil fill housing you can see the gear. Maybe it is stripped.
nice find with the dual hydro.

I did not know there were 2 versions William,I have trhe older style.Here is mine,no pin-striping or cub cadet on the sides.

Jesse, Out here I saw 2 , 3 digits in one day.One was at Jacktown this past may, 968, the one Chris mentions for sale in PA and the other, 969, I saw the same day I picked up an a 5 digit Original from a seller at Jacktown.It was sitting in his barn.Not pretty like the two shown here.Same guy sold m...

Got there after Scott left, saw mike and I thought I saw you Albie wasn't sure though.

I think that used to be owned by one of the forum members on here,maybe he will chime in.

Mike you are a fart smeller

found this in my stash of parts.
looks like one from an original.

looks like I will be watching it from home then.

Did have one of those decks,thought it was a PO mod... this 70 has 8.500 tires on it.
CPE. -2 section B page 13 shows those brackets hooda thought that.

Yes as long as it is not -5°

Large one.
It is 3"

Ronnie,
not sure about the 1650,but you can cut off all the wires to the plug and put new terminals on and then connect them to the switch.
use the plug as a guide for proper connectivity.

Man what a great price!

Hey. Paul how are those front chains working out for you?
Ken
Your gonna need a bigger bolt!!!
I broke the edge on mine today. Have to make some changes before the next snow fall.

Part 11 is a left hand thread nut.

these are the belts I have.
It is 3/8" x28" long

The air filter is up 212.00