Cub Cadet Collectors dot com

Cool u got it. Lmk if you need that 0 ring. I think i bought 40 the last time. I actually prob have the seal
Brg o ring. All in stock

After you get the big snap ring out from the front then the whole mess comes out all at once. There is an O-ring in there which is why it does not wanna move easily

Josh Snyder December 19, 2017 Would like to take the time to wish everyone a Merry Christmas and a Happy New Year! 2018 Pa Plow Day will be held Friday April 20th and Saturday April 21st. Same location in Watsontown / Dewart. More details to come in January, but don't expect much to change from the ...

Definitly very nice work. I am currently in the middle of a complete resto of a 374 deck.... having 2 to work with trying to find enough good parts. From what i can see i find nothing major wrong with any of my 6 spindles. although the upper and lower bearing cups seem to be the piece that takes the...

So after some research i did find that the switch from a cyclops as joe said will work. same pinout. Also aftermarket replacements for those are readily available. Still not sure why they show the replacement for the 2072 type switch as not having the right pinout.

Has anyone found a suitable replacement switch for the 82 series besides OEM.
When u punch in the part number 725-3086 you get alot of hits ebay etc but the pinouts are not correct on any of them.

Ok so i got mad enough and took the deck off to get a closer look at things.... and i think i found the issue... the "scissor" arm im gonna call it has been broke and welded.... i think at the wrong angle... also the subframe itself is bent in the back.

ok, yea i have looked at the manual and found some of the same things... the frame is connected at holes "E" and i suspect the belt is stretched cause i am almost out of adjustment even being mounted in those holes... also the lift links are mounted in holes "C" just as the manual lists. originally ...

ok with the deck almost all the way up i have 2 inches cut height in the front and 3 inches cut height in the rear.... the manual says should be 1/8 inch lower i think in the front? not an inch!!!

Ok this 1862 is killing me! it came with a 321 46 inch deck that had NO lift at all... so i determined that deck was for a later 1862 after 821xxx. OK fine so i traded joe for a 336 46 inch deck and undercarriage. Yea this all looks better. get it installed and i get a tiny bit of lift.... so i move...

Ok yea the impact worked with another hand kinda wedging the gear.... so that one is now apart.... on to the other 2.... these are like crimped? or snap ringed or something?

Ok thanks tom...thats kinda what i figured....i saw some replacement drives on ebay for like 13 bucks. Do you have any experience taking the gear off to clean or replace it? The one i have has a nut...but i cant really detemine how to hold the shaft to loosen the nut without samaging anything. The o...

Ok so i have 3 now starters on the bench that all do the same thing... they spin but wont engage the flywheel! It looks to be like a double helical gearing and maybe the inner one looks sticky. Anyone well versed in getting these to work properly? i think i have heard your not saposse to use any typ...

hope everyone drives safe... me and engine mike should be heading out around lunchtime

I have a power steering setup from a 1862 in my 882 diesel loader... same thing lift cylinder and control valve delete. I have a cap on my AUX... and all is well
On the 4 port steering you wont have the aux.

Well i finally got around to making some rear hangers...my first attempt here...gotta make a few small production changes but all in all not too bad

And Landon David Chester has entered the tractor world. born 8/18/2016 7 lbs 14 oz

Here is a another video

more

some pics of plow day

Below is what was originally posted on the old IH registry on converting from ignition coil ( Onan )to a magneto ignition ( Kohler Magnum ). +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Part number 725-1375, "relay" is an active Cub Ca...

well according to this

downloads.php?view=detail&df_id=96

only shows upto model 122 but it looks like hole B or i would assume the center hole.

thats where i always install it

less than 2 weeks to go.... who is going??

Hi, I am in need of the measurement between the 2 plates or basically the length of the tube. the one in the picture has been modified for a special application. and i must have sold my last one.

are you still looking for a replacement ported pump... i should have a few

how about the installation manual

downloads.php?view=detail&df_id=111

could u have an older 42 inch deck? seems to me the older ones had a fixed idler pulley you had to set the tension manually. maybe its loose?

Dag1450
Why is it almost impossible? I have a Cast Iron rear in my 882 which i did with no problem. and I am currently working on Building a 1772 with a Cast iron rear out of a 982. The only thing i am not sure is how the rear pto will interfere with the tank. Is there something else i am unaware of?

Im definitly not an expert on welding by any means... but having brazed a little aluminum id say it not where near clean enough.... this type of welding isnt like welding steel..... a stick welder will blow through rust paint etc. This type of welding must be spotless. Maybe some JB weld would do th...