Cub Cadet Collectors dot com

If you do store ethanol fuel the only way to do that is to store it in a STEEL air tight container. Plastic containers will actually interact with the fuel hasten the fuel's break down. Have done extensive research on storing fuel for the racing fraternity and that is what we found. Storing fuel eve...

Do not use the RED Sta-Bil....Use the Blue Sta-Bil.....it is formulated to handle the ethanol problem. This government gasoline has a shelf life of less than 60 days. Run a chromatograph of it and compare to feed stock gasoline and you can see the JUNK that is in it...... The amount of additives is ...

Paul:

Will say some prayers for you and keep you in my thoughts . Wish you the best during your treatments.

Better that they found it sooner than later......

Your positive attitude goes a long way in treating any illness.

Deck wheels hit GT Tires

The engine definitely was, both the gas version and the diesel version. Not sure about the running gear.

Glad he is ok but I will not be pitching any help his way after what he did to me!

Yeah BM...
I WIN! 782D's

Vinnie: While you were at the auction, I was picking you back pocket. Picket up a "funny colored" diesel with the number 330 on it for a grand in Dittmer. I also picked you other pocket two weeks back and picked up a 1772 for $1500 in Wright City. It is getting a makeover so it will be in tip top sh...

Kinda lost interest.....in Cubs....... other IMPORTANT things have taken over.......BB you know what I am speaking of.... Still have lots of cubs and STUFF...and will be at Cub-arama even though I'd rather be in Pierce, NB for the big auction. Will have to bid on line instead. Finally picked up a 98...

Bryan

CALL ME!

Excellent Press......Great Lifetime warranty by Dillon...

Now you need to add the automatic case feeder and bullet feeder so it is totally automatic....

Nice catch.

7.3 is barely broke in.......

Should get in the 18mpg range......

Needs a few more tires.......

BB

What are you trying to reload?

Next time you past by on I-64...stop and I will show you reloading!

Also will show you some other interesting items that I know you will definitely LIKE!

That looks like my D65E6 Komatsu that I buried a few years back. It took the equivalent of 6 977's to pull it out after I rigged cables and pulleys to get it out. The hole that I left was big enough to go swimming in. Then I buried my 60 ton 2500 P&H excavator in the bottom of the creek trying to cr...

34? Half my age....gee you are still a youngin....LOL

I thought that that was the new retirement age.....

BG products are not available over the counter if my memory is not too rusty. Enthanol laced gasoline will cause the carb to GUM up. Alcohols all leave a gumy residu and that will gum up a carb rather quickly. Also, ethanol laced gasolines will attract moisture very rapidly. That is one of the reaso...

Jason
Good to see you are still around.

My choice would be at least 30-06 or maybe a 50BMG.....

I have had somithing as little as a piece of fuzz mess up my 2072 carb....

BB
You can do like me and retire...then you will have plenty of time for the projects.....NOT!

What happens is you get too many projects and nothing gets done....

Dave:
That should work...it takes a lot of patience.

When the idiot gears took a permanent vacation on my 169, it left a LARGE hole and some missing pieces of block.

Cost a ton to find a true replacement block.

Still have the 169 cause I can't afford to sell it now!

This is different than the original registry. I printed out a complete copy for my personal use when it was still up.
This looks like somebody has/is redoing the registry.

Paul
I'll have to park out in the boonies this year.
I can haul a lot of cubs since it has a ton of tie downs on the floor.
Tows a whole lot easier than the other one.

I changed my cub hauler again. Not satisfied with the 40' 3-axle flat bed cub hauler or the 30' 3-axle Haulmark enclosed cub hauler. Decided to replace my 30' 3-axle enclosed tag trailer that I had at Cub-arama last year with something a little bigger. 48' 3-axle Goose neck Haulmark...cold not pass ...

You can easily check the magneto/coil. Unplug the wire harness that comes out of the shorud. THen try and start it. If the coil is bad, it will not start. If it is good and something such as the key switch is bad, it will run. To shut it off, replug the connector. It should shut down. I believe ther...

I spoke too soon! About an hour after I posted, it started snowing here and left 2-3 inches. Farm got another 5-7".
Had to crawl into the heated cab of my Tackuchi and push some snow for church and a couple of businesses.
Too cold on an open tractor like the cubs so they stay parked.

BB
Thanks for taking all the snow. Grass is green in the front yard.
Skid steer is still parked on the trailer and full of diesel....
Cubs are sitting sient in back yard.

Paul: Trailer is tagged at 32000#...that is the reason for three 12000# axles and the truck is tagged at 12000#. The original GVW of the truck is no longer valid due to major changes to frame, suspension and axles. The 12000# is lower than what the GVW is for the F350 w/duals. Already talked to IDOT...

BB...
I'm gonna solve that when I put a Cummins in place of the PSD.....That is why I kept the 97...theris a kit available for the swap.

If I was going bigger, then I would just buy an 18 wheeler,,,OH this is an 18 wheeler.....

Who needs a plow or disc when you have one of those.....just mash the pedal down and till your field in rapid fashon!

My dad did the same stupid stunt with a J... D... Model B pulling logs. It waled right over...he was able to jump off...Yes it does happen rather quickly....

BB I left 5 feet on the mfg floor. It is only 35 feet of main deck with 5 feet of ramp. I wanted to be able to haul two backhoes or three skid steers, that is the reason for the 3 axles. I also wanted to be able to haul a 20,000# dozer. My real cub hauler is a 30ft long Haulmark 3-axle enclosd trail...