Cub Cadet Collectors dot com

I still have to cover the trailer wheels with the chrome simulators. I have to braze the nuts on each of the plates that hold the caps. They are just press fit so I am improving on Pacific Duallies work. THen it is off to the chain/binder store for more ratchet inders and chains. Hate moving from tr...

Vince: Big Mike has it right.....just building it the way ford should have done when they owned part of Cummins. I put too much into that truck to get rid of it.....Still have not figured out how to rectify the unsquare underbody boxes. I built the openings 1/4"larger but the boxes are not square so...

Paul: Yes, the Stent procedure went well. Was 99% blocked in the LAD....put in a 3.0mmx18mm stent. Just now getting back to full speed. The before and after pictures can scare the you know what out of you. I got real lucky. IF all goes well over the winter, the Powerstroke will be replaced with a Cu...

Finallly took delivery of my new Cub Hauling trailer. Brand new Load Max w/35 feet long main deck and 5 feet long tail with 3 ramps that make for 5 more feet of deck. Capable of 30,000# Gross weight. If the cubs are not mobile the truck is equipped with an "A" frame boom that stows so I can lift the...

AND some white lithium greese to hold the keepers in while releasing the compresses valve spring. I have used many tubes of white greese over the years holding valve keepers in while rleasing the valve spring. White greese is more compatibe with your engine oil than regular bearing greese. Also a pa...

Is taht the diesel engine you were going to trade me back a year or so?

There was one of those at Red Power Roundup in DuQuoin, Il this month.

Was this the one at red power in DuQuoin?

I had a nearly identical project 80% complete before I ran out of time. I was mating a 126 and a 147. Used the 147 frame and engine, the 126 rear and creeper. Here are some of the things I experienced. The pedestal will need to be changed or a bracket added for the clutch fork. You will not be able ...

Try this site...Portions of old registry are still here


http://web.archive.org/web/200203280852 ... istry.com/

1782 has is totally different than the 1772/1572 models which are nearly identical to the 982. The 1782 has the radiator under the dash, not in the front like the 15/1772 models and the 782D. Everything from a 782D, 15/1772 will interchange with the 982 execpt the 782D fuel tank is different. You wi...

Geezer
I still can get access to the Registry for all models but 126. PM me and I will give you more information.

BB
If you show up at my auction on the farm on June 9th, I'll buy lunch....do bring cash though...lots of cub stuff will be on the block along with antiques, heavy equipment, trucks, trailers, cars, tractors, and equipment from my closed surveying business!

BM
Thanks for having my back....You are correct...

Solid mounts may also contribute to the bolts loosening especially without the upgrade...becauce the two side rails may not be perfectly square/level with the pan.

Unless you have new rubber mounts, they will not hold the two rails correctly and th ebolts will loosen up. Every Q/L I get I weld the cross brace between the two IOS rails. This makes a very sturdy cradle that will keep the pan bolts tight. I have jerry rigged new ruber mounts and the welded cradle...

Todd
That is why I bought all that I cold get my hands on Sunday when a local IH dealership closed.....Manuals, signs, floor mats, fliers, brochures..regardless of model.....Filled a 30' long trailer!

Still was outbid on some other items.....

Here are a couple of M & W 9 Spd pictures to help you determine if it is really a M & W.

Number of items. 1...I believe your bearing are too tall.... and the previous owner mus thave used a belt that was too long on both sides.... The springs go on top of the bearings. 2. My Manual shows both the non tensioner and the tensioner 3. The manual states that the nuts on the jack shaft bearin...

Hydro Harry....
Come to my auction in June and you can buy a bunch of Cub stuff....

See...Yellow fever has NO CURE!!!!!.....LOL

Yep...it had to be a HYDRO

Paul.. I know how you feel. I was towing my fuel dragster to the tract down HWY 51 south of Decatur, Il in 1972 on a cludy saturday. All of asudden, a twiter dropped out of the sky about 200 yards EAST of my car....Luck it was on the east side as I woud have had no place to go... Worst was 1957, Dec...

Day Job: What day of the week is it? Actually, I have been working in the family Land Surveying business since it opened o 1960. Grew up on the farm after moving there from the Left Coast (Calif). While working in the business, had a lot of side interests, Trucking Company, Blue Print Business, Comp...

if you do put in a new set of rings, you will need to remove the ridge. If you don't, you will break the top ring, the piston or both. You need to actually remove the ridge before taking te piston out because the rings will catch ont he ridge.

So now that you are making all that extra money, you can buy the 318 I have in the barn waiting for you to buy it.

What is the degree in?

Thah is questionable...LOL
Just because you are getting advance edumicated does not mean you are technologically astute....LOL

782D and 1572 have different glow plugs than the 1772 and 1782. If my memory serves this old guy, the parts man told me that there were two different plugs for the 1782 depending on serial number. I can't find any reference in the Parts Manuals on line but that is what I remember him saying when I w...

If you are talkint about a new unit...it is nearly $800...... BB.....better save up your nickles and dimes...all of my cub stuff and a nice 318 will be part of my auction I am planning for May..... Selling the Farm-House-Pole Barn, Swanwick property, farm equipment, garden tractors, dump truck, trai...

Vince.. Look who you woke up.....Brother BB....I was wondering if he was still alive....LOL It amazes me how people can tear up something as stout as a 2072. You ofter wonder just what their hous looks like when you see how poorly they maintain a relative expensive piece of equipment. How many more ...

And final set

Here are some more...

Here are some pictures of a M&W 9 Speed from Cub-Arama in September.