Cub Cadet Collectors dot com

Could it be an engine from a john deere 208?

Greg,

Send me an email If Big Mike can't help you.

Chat seams to get started after I go to bed for the night.

I'm up for a good bull session in chat in it starts around 9 to 9:30.

You need to remove the crank and cam to install the governor.
This would be a good time to check for wear on the crank, rod and cylinder bore for wear.
You should be able to rebuild the short block for $300 to $600 depending on your mechanical skills if it needs it.

The threads were undersized when I first check the threads.
Ran a 1/8-27 NPT tap and check the threads again.
Life is good now.

Proving grounds is too wet to plow plus 149 is burried in the front of my trailer. Hopfully by Wednesday the carb goes on my 149.

Why cant any type of cheap repo or this carb be found on the net? I found this carb on E-Pay. Finally feeling better. Had a few things that needed done before I tried carb on my 149. I tried to install a fuel line fitting on new carb. Something is wrong with the threads...fitting won't screw on.......

Why cant any type of cheap repo or this carb be found on the net? I found this carb on E-Pay. Finally feeling better. Had a few things that needed done before I tried carb on my 149. I tried to install a fuel line fitting on new carb. Something is wrong with the threads...fitting won't screw on.......

few pictures of the carb: http://i152.photobucket.com/albums/s167/Cub_Dude/Proving%20Grounds/carb005a_zpsb5a6d128.jpg http://i152.photobucket.com/albums/s167/Cub_Dude/Proving%20Grounds/carb004_zpsb8bdeda6.jpg http://i152.photobucket.com/albums/s167/Cub_Dude/Proving%20Grounds/carb003_zps8f8c2658.jpg

I haven't tried the carb yet.
The proving grounds has been closed do to operator being sick the last 4-5 days.

There are several things on a Kohler I would not paint. Carburator, governor linkage , cylinder head and flywheel. Main reason I do not like paint on the carb and governor linkage is the paint can keep the carb and governor linkage from moving freely. I will mark the S and T on the flywheel with pai...

6 days to Ohio Plow Day

Here is a photo from Ohio Plow Day 2007

I hate to say this but it doesn't look like I will make it to Ohio plowday this year. With Chris getting married on the 26 i have had to schedule my time off around the big event. Jess plow a round or two for me, on a slant grill if you can find.one ;-) l hope everybody has safe travels to and from...

Andrew,I talked with AW today.They have had 5" of rain since last week :shock: but he said the field is not under water :shock: :shock: . The beans are ready but they are near the end of the list to be picked. Let's all hope for dry weather,some nice sunny breezy days and no combine issues. If we t...

You shouldn't have any traction problem with those weights and chains.

Hopefully your 149 doesn't like gas like my 149 does......My 149 needs it 2 gallon tank filled every hour.

Due to ground being too wet the Plow Day is canceled this weekend.
Plow Day is rescheduled for Aug. 17.

Van Wert Ohio Plow Day 2013 will be held August 10.
Location is 12964 Elm Sugar Rd. Scott, Ohio.
Plowing starts 9 am.
We have a total of 105 acres to plow.
There will be big and garden tractors plowing.
Send me a PM if you have any questions.

Red Power Round Up 2013 will be held June 19-June 22. This years host Ohio Chapter 6.
The location for this years round up is the Allen County Fairgrounds in Lima Ohio.
Chapter 6 has a web site for the round up: http://www.rpru2013.com
Hope to see you there.

Location of serial number for late model IH Cub Cadet 70-100

Location of serial number for early model IH Cub Cadet 70-100

Here is a link to Red Power Round Up 2013 in Lima, Ohio:
http://www.rpru2013.com/

Glenn, Here is a closer view what your hitch should like: http://i152.photobucket.com/albums/s167/Cub_Dude/Plow%20Info/OrginalSleeveHitch04.jpg Brinly made 3 different styles sleeve hitch plows. One was the one I posted. One like the one you borrowed and this one: http://i152.photobucket.com/albums/...

Glenn, Does your plow look like this one? http://i152.photobucket.com/albums/s167/Cub_Dude/Harold%20100/plow06.jpg http://i152.photobucket.com/albums/s167/Cub_Dude/Harold%20100/plow04.jpg Your plow should have a single set of holes on C part. I added 2 more set of holes so I can get the plow to plow...

Lets see.......How many does it take to get a 169 running????? http://i152.photobucket.com/albums/s167/Cub_Dude/Plow%20Day%20Pictures/OPD1207.jpg http://i152.photobucket.com/albums/s167/Cub_Dude/Plow%20Day%20Pictures/OPD1205.jpg http://i152.photobucket.com/albums/s167/Cub_Dude/Plow%20Day%20Pictures/...

Pete,
Here are a few pictures from my 149:
Lockout pin in place:

Float position:

Andrew,

Do you have a picture of your trailer?

It help in recovering your trailer.

by BigMike Red and white,yellow and white,purple with orange polka dots when Merk is done I'm sure it will stand proud and look just as good. purple with orange polka dots........mmmm...thats a thought....... (Thanks Big Mike) by JLazar How's about that 800? Plan on getting that done, or this 100 f...

by Vince_O
Dale

Thats a good lookin 100 there. You gonna make it as nice as the 70 you did?

Thanks
I've been wanting to build a red 100 with a few mods to the drive line. I have a set of round fenders and a hydraulic for it.

I went to a local estate auction a few weeks ago. There was a IH Cub Cadet 100 and blade listed. http://i152.photobucket.com/albums/s167/Cub_Dude/Red%20Demo%20Cub%20CAdet/rd001.jpg http://i152.photobucket.com/albums/s167/Cub_Dude/Red%20Demo%20Cub%20CAdet/rd003.jpg http://i152.photobucket.com/albums/...

I always run a tap thru all the holes when I rebuild an engine or replace a head gasket and replace the head bolts and studs. I prefer to use Kohler head bolts. If the engine is for someone else I have used grade 8 bolts on an engine if the customer request them. Head bolts that are reused have been...

New bolts?

Grade 8 bolts or Kohler head bolts if they were replaced?

Did you run a tap through the threads?

Mike,

Remove master cylinder from the booster. Back seal in master may be causing the problem.