Cub Cadet Collectors dot com

we make the decals is yours the IH with no back ground if so I have the pattern

now you all know mtd is making the craftsman mowers now and I have seen my share of burnt cubs they all go up in flames if the gas gets dumped on hot exhaust

well it was fun while it lasted to say the least

super rockshafts are not the same as gt rockshafts the super rockshaft has a wider hooked part and on the 1872 2072 they have a arm that comes down the inside of the frame which is for the blade or blower gt and later supers dont have that arm and the real late supers and gt use bearings instead of ...

982 parts as long as they are shared with other models are not bad if they are a super tractor part only look out I can go over some of the harder parts to find the rear splined coupler, front rims,onan twin mufflers,IH emblems,steering column on non power steering,driveshaft parts,hydro pumps thats...

ok just a update on how things are going I am healing well just takes sooooooooooooooooooooooo long I was in the hosp today to change the bandage and all looks good we are very glad that all is going well we had the busiest week we had in a long time last week sold 5 tractors in one day and bought i...

Don and Carol both are dong ok but the bills have taken a toll on them so they are selling most of what is left I was asked to come and buy the cub cadets about 4 weeks ago but with me being in the hosp and all I was not able to do Don justice in buying them from what I seen in the ad he prolly is s...

I want to thank you for the well wishes its real nice of you guys to think of me and I have 3 bosses here tlling me what I may do so I surley wont get lost or at worst do somethng I shouldnt love my bosses tho they are looking out for my best intersest

the not so funny part is after they removed every thing it left a hole in my stomach that is 6mmx12mmx51/2mm deep and that needs to grow closed we still have customers to take care of I just cant lift anything one of my freinds on his days off will be here so if we need anything big done he can do i...

I had incident on sunday night found out I had a hernia went to the er to get checked and was told we will have the operation on monday white cell blood count was up a good bit by midday so was pushed till tuesday 11 am when I woke up it was 1 1/2 hrs later then was told it would take here we not on...

Todd I have a set of NOS 102 decals on ebay right now if you want them for original color they are original IH ones and I have a set of 122 that are not complete as well

no that is still there as far as I know

those are/ were 1610's we bought those for the rears the engines were both bad = stuck we scrapped them after pulling the rears

the tractor on the trailer crosswise is a 1250 also on the load is a 70 2 126's 2 1610's 108 123 105 the engine is stuck from sitting yes I will sell it but we have lots nicer ones sitting in our barns these tractors have been sitting for a few years and the dealer we bought them from was glad we bo...

we went shopping and this came home with us we bought a dealer junk yard this is just one load of 3 we hauled already

we have right now 11 10hp short blocks in the dumpster Jess at last count we had over 125 engines on the floor the ones we parted either had no carbs or other problems we just did not toss them in we pulled the heads and oil pan, pto clutches,carbs then we dumped them scrap is paying 7 bucks ea what...

Merry Christmas to all of you from the Weavers

another block is a better priced option we just scrapped 10 hp short blocks cause we are out or room

102 was made between 65 66 67 good tractors we have owned prolly 30 or more

2182 being a super tractor will also have heigth concerns since its taller and longer it can be done just not a direct bolt on we just sold a 402d to go on a 1872

I am glad you guys aint looking for me in this way there was a guy in MO that was doing this and when the feds caught him he when away for awhile it pays to be honest

I dont think I have ever seen a model or serial no on any we have had and we had 7 or so

did you contact the seller and let them know and the alum housing is harder to find here around the holidays it seems the packages get a little rougher treatment from what I have seen

when putting your creeper back together wire the roll pin that holds the shift fork in just run a wire thru the pin and wrap it around I have seen a bunch of creepers that needed a handle because the pin fell part way out and wore the handle and shift fork just my 2 cents just replaced one today

I just get a used one which we have

yes pto bearing seen it happen a few times

I only know of one other one and thats in the mid west as well I have had a 102 and a 100 box sold the 100 box which I wish we kept still have the 102 box

the guy is from Ottawa Ont name is Hudson I am pretty sure they own a cub cadet dealership he has a brand new 40th anni on the shelf

nice haul Paul you guys saying you cant find good prices on cubs we have been buying cubs cheaper than we have bought them for some time now running tractors up here can be bought for 150.00 and up

I have repro handles here for 45.00 and I have frames here with the factory slot in it if yours dont have it you may want to keep it because those early frames with no slot are getting hard to find