Search found 1099 matches

by JMotuzick
Mon Aug 06, 2012 11:17 am
Forum: Cub Cadets and Shooting the Breeze
Topic: Questions about 42" snowblade lift brkt.
Replies: 6
Views: 4087

Re: Questions about 42" snowblade lift brkt.

Jess
I'm not sure of the length but I know it's 5/8 not 1/2 like the older models. There is a bend that follows the bottom of the side panels. It will sit basily level then kick up at about a 30 degree bend to the mounting point on the tractor. Your best bet is to find a used one or one to copy.
by JMotuzick
Thu Jul 19, 2012 7:00 am
Forum: Cub Cadets and Shooting the Breeze
Topic: first time cub owner. need help
Replies: 16
Views: 8669

Re: first time cub owner. need help

Welcome
122 is the model!
The deck would have a small tag riveted to the left side
Good luck and post more as questions arise
by JMotuzick
Thu Jun 21, 2012 5:38 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: electrical trouble shoot help
Replies: 5
Views: 6906

Re: electrical trouble shoot help

Start with a good battery if the problem continues the look elsewhere. The coil needs to have 12v to provide spark.
by JMotuzick
Mon Jun 18, 2012 7:29 am
Forum: The Coffee Shop
Topic: Congrats to Forum Member Joe and Colleen's Wedding
Replies: 17
Views: 11072

Re: Congrats to Forum Member Joe and Colleen's Wedding

Thanks for the kind words every one off to somewhere tropical to relax for bit with my new bride.....
by JMotuzick
Sun Jun 17, 2012 5:44 pm
Forum: The Coffee Shop
Topic: Congrats to Forum Member Joe and Colleen's Wedding
Replies: 17
Views: 11072

Re: Congrats to Forum Member Joe and Colleen's Wedding

Thanks for all your help and kind words! I'd post a few pics but they won't upload from my phone.
by JMotuzick
Fri May 18, 2012 8:01 am
Forum: Cub Cadets and Shooting the Breeze
Topic: PTO rebuild
Replies: 14
Views: 12893

Re: PTO rebuild

Greg That would be the need heavier / newer pto that others have discussed. Seeing as bowed your having issues only a short time after rebuild I would use that clutch and also find a pto arm from a 1x6/7 they are already beefed up. After trying the plates and doing the full rebuild you should have a...
by JMotuzick
Mon May 14, 2012 6:02 pm
Forum: The Coffee Shop
Topic: Haban pieces
Replies: 12
Views: 10045

Re: Haban pieces

Steve
Send a copy to our webmaster Dave, then maybe I can get that NOS front hanger back that he was going measure 3 years ago...........
by JMotuzick
Sat May 12, 2012 3:18 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Who made these wheel weights ??
Replies: 3
Views: 3406

Re: Who made these wheel weights ??

Jess
I'm at an auction with our web master, there is a simplicity walk behind with a set of those..... I cant seam to load the picture from my phone I'll try again from home......
by JMotuzick
Sat May 05, 2012 12:00 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Year of Manufacture
Replies: 4
Views: 3752

Re: Year of Manufacture

The s/n should be stamped on the front right side of the trainsmision clean the entire area of dirt as there are 2 places it could be. One spot is on the high spot..... You'll know what I mean when you get there, the other spot is just I front of this high spot. The 70/100's where made together and ...
by JMotuzick
Fri Apr 20, 2012 6:15 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Restored 125 pics?
Replies: 9
Views: 6583

Re: Restored 125 pics?

I'm not sure what you looking for these are of my 105(same tractor different engine) I did about 5 years ago, let me know if you need some thing specific.
by JMotuzick
Wed Apr 11, 2012 6:30 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Wide frame choke cable
Replies: 11
Views: 8047

Re: Wide frame choke cable

Not my intention to steel your thunder! Dave has now re-done 3 tractors worth of throttle and choke cables for me. hummmmm JB weld you say? maybe that's why the choke on the 126 is already messed up!
by JMotuzick
Fri Apr 06, 2012 11:40 am
Forum: Cub Cadets and Shooting the Breeze
Topic: 127 manual pto rebuild kit??????help please!
Replies: 6
Views: 6020

Re: 127 manual pto rebuild kit??????help please!

Mike 759-3490 The kit runs about $45-60 it all really depends on who you get it from. Most of the time all you really need is the disk though, There is someone on e-pay selling just the disk for about $30 but without the adjusting tool. I'm not sure where you would find the tool other then making on...
by JMotuzick
Thu Apr 05, 2012 10:21 am
Forum: Tools and How To
Topic: steering wheel removal solved
Replies: 10
Views: 21233

Re: steering wheel removal solved

Bryan I stopped at Jimmy's shop, he's out of stock. He said I should sell you mine! If you can get the troubled wheel to PD (or if you there Friday and head home Friday night)I'd be happy to let you use it but I need it back.... at this point there is no ETA on the next batch, his work load has rece...
by JMotuzick
Thu Apr 05, 2012 7:08 am
Forum: Tools and How To
Topic: steering wheel removal solved
Replies: 10
Views: 21233

Re: steering wheel removal solved

Bryan
I'll look into it today, will you be at Danville? If so I'll see if I Can get one there next week......
JOE
by JMotuzick
Tue Apr 03, 2012 5:42 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Wide frame choke cable
Replies: 11
Views: 8047

Re: Wide frame choke cable

Harry http://www.ebay.com/itm/LAWN-MOWER-THROTTLE-CABLE-Z-BENDER-MURRAY-CRAFTSMAN-/260275996463 Cable benders can be had for a very low price, Mine is more like a pair of pliers but cost about the same. New cable can also be bought, both inner and outer, The ends can be soldered back together after ...
by JMotuzick
Sat Mar 31, 2012 1:14 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 982
Replies: 21
Views: 31144

Re: 982

Eric Welcome! IH built Cub Cadets until June of 1981 after that MTD bought out the Cub cadet line and moved production to Brownsville TN. The X82's came out in 1980 as others have said, so a IH built 982 was a 1 year old tractor. However MTD made Tractors with Red paint and tagged them IH until 1985...
by JMotuzick
Thu Mar 29, 2012 7:11 pm
Forum: CCC and MTD Built Cub cadets
Topic: 782D Diesel - Recommended Engine Oil and Filter Part #
Replies: 4
Views: 5801

Re: 782D Diesel - Recommended Engine Oil and Filter Part #

Rob
I just put a Wix 51064 on my 782D last week, this was a direct cross form the Napa 1064 that was on there. Of course you could get the one from Kubota...... I used 15-40 but was reading under the hood basically the same as Todd was saying as I was doing it....
by JMotuzick
Tue Mar 20, 2012 8:21 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: IH-490489-R2 Belt
Replies: 34
Views: 28598

Re: IH-490489-R2 Belt

Just an up-date, it's been since last June but the stens belt on the 100 is still going strong. I did a full tune up on the ole 100 this past weekend and found the belt to be in great shape, if there is still an issue with the MTD belt next time I need one I'll get a stens one again! FYI the stens n...
by JMotuzick
Tue Mar 20, 2012 8:16 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 1450 dual hydraulics
Replies: 11
Views: 11595

Re: 1450 dual hydraulics

Rims and bearings are different however, the 16 6.50x8's are the same size for the Wide tires and the only size used with 1" spindles.
by JMotuzick
Thu Mar 15, 2012 7:14 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 126 resto
Replies: 39
Views: 20765

Re: 126 resto

Harry NO progress means no pictures! I'm almost done, I gota get the seat mounted and then installed on the tractor then I gota mount the tires on the rims then to the tractor! other wise done. I do need paint on 2 bolts and 2 shields the weather has been getting better so I hope to paint outside so...
by JMotuzick
Sun Mar 11, 2012 3:38 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Rear hitch question
Replies: 6
Views: 4338

Re: Rear hitch question

David Look between the frame and the top of the front axle there is a front stabilizer kit that came with these loaders that I'm betting was left on the first tractor the loader was mounted to. If it's there it's a sign that the tractor may have once had a loader. If not maybe the PO had made his ow...
by JMotuzick
Sun Mar 11, 2012 3:34 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Rear hitch question
Replies: 6
Views: 4338

Re: Rear hitch question

David I had a hard time seeing the brackets so I adjusted the photo some..... CC 122 rear hitch (Small).jpg The top looks custom but the bottom looks to be the same as the bottom bracket on my Danco loader weight box mounting. This picture is poor for what I'm trying to show but.... IMG_0152 (Small)...
by JMotuzick
Sun Mar 04, 2012 12:55 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 126 resto
Replies: 39
Views: 20765

Re: 126 resto

Lewis
I found a guard, and Have a seat, I've got to paint the guard and put the seat back together. The seat will be the one you didn't want that night at the watering hole out your way. Once I get it pulled back apart it will be better then New!
by JMotuzick
Sat Mar 03, 2012 6:24 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 126 resto
Replies: 39
Views: 20765

Re: 126 resto

Been picking at things slowly, The most current pictures are at the bottom....
by JMotuzick
Sun Feb 12, 2012 12:56 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Johnny Cash type of tractor.....
Replies: 51
Views: 29699

Re: Johnny Cash type of tractor.....

Josh
I always thought they stopped making the 149s when the 169s came out. I believe they continued making the rest of the 89 series until the end of production until the quiet line series started. Then again...I could be wrong too.
by JMotuzick
Sun Feb 12, 2012 11:19 am
Forum: Cub Cadets and Shooting the Breeze
Topic: Johnny Cash type of tractor.....
Replies: 51
Views: 29699

Re: Johnny Cash type of tractor.....

Harry The Kohler tags can all be had repo but the IH tag I'm still looking to find a source for. Starter tags can be had too, Same tags as used on 50's GM cars I found a 3 pack of tags for about $10 just gota have a stamp set to re-stamp your numbers. Josh I've had 149's with low s/n's down around 4...
by JMotuzick
Sat Feb 11, 2012 10:33 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Johnny Cash type of tractor.....
Replies: 51
Views: 29699

Re: Johnny Cash type of tractor.....

Lots of good food for thought on the dip stick maybe I should have used a different block for my 126. I'm not going to change it now though! Carl My 13 fin is sitting comfortably awaiting it's old frame just a few feet away...... Harry It's been good to see you posting so much today! I'm glad you fo...
by JMotuzick
Sat Feb 11, 2012 10:27 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 126 resto
Replies: 39
Views: 20765

Re: 126 resto

Lewis The grill is the one in Dave's picture. From you I figured as much...... Harry Dave wasn't working so much as Mike and I where that night, not quite how that worked out but Dave was off looking for stuff and Mike was just on fire. If you had a whole 55 gallon drum of hardware I'm sure it'd be ...
by JMotuzick
Sat Feb 11, 2012 6:57 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: 126 resto
Replies: 39
Views: 20765

Re: 126 resto

I clean/sand blast all of the bolts/parts before they get dropped off at a plating shop in the Hartford area. As of mid-January I blasted all of the bolts I have saved from every parted, or restored tractor. It's a full time thing, as tractors come apart for something I save the old hardware. When a...
by JMotuzick
Sat Feb 11, 2012 5:05 pm
Forum: Cub Cadets and Shooting the Breeze
Topic: Johnny Cash type of tractor.....
Replies: 51
Views: 29699

Re: Johnny Cash type of tractor.....

Harry that "Under the deck" Picture was 10,000 on the old forum, still saved that way on my computer. I had the dash tower until not long ago, still might be close by, I did a bunch of clean up last fall I think it might have just gone to scrap.... Also check out the "126 resto" thread more pictures...