Cub Cadet Collectors dot com

Way to go Vince; glad to hear Have a good one Ken in Pa Hows the loader coming? Getting some bugs out of mine; if you figure a way to operate the hydro by foot take lots of pics Ken in Pa

Got this loader together & working for the most part, a few small leaks After running it a little I know it needs rear weight and a foot operated hydro The tractor is a 2082 dual turning brakes wihth an Extreme motor woks three point Any one done this conversion ,have any pics ,ideas ,or help It wou...

Thanks Dale I read you need tubes so figured I better check

on 26x12x12 cub rims do I need a certain type valve stem and or tube to put ballast in tire tHANKS Ken

Checking out 1210 and found the control lever pin to be #/4 way wore thru Was wondering if this can be pressed out and replaced or do I need to find another rod? Doesn't look too bad where trunion spring is Changed the filter and am checking to see why it won't move Thanks Ken in Pa

Finaly got my front end loader off the ground!I,m definately a procrastinator(?)Have a few leaks to contend with and have to find out how to set the pressure before I run it too much Will look for some kind of thread sealer after work Will get pics posted when I can snag one of the Grandsons Have a ...

Any time I tried generic belts on my mowing Cubs I had no luck at all I,ll pay the extra for the real deal Ken in Pa

Have been thinking of trying to mount one on a 2018/20 as my 1250 is rally giving me fits this year and need to till mine and two kids gardens any help also appreciated Thanks Ken in Pa

my son andy and i had a great day picking up a tiller at Greg Hennessey's place today had great time talking cubs and other topics he definatly knows his tractors thanks Gregg!

make sure when the belt came off it didn't damage the wire feeding power to the pto Had that problem with my 2082 when a deck belt shredded hope this helps ken in pa

Thank you Mr Campbell I'll pick one up first chance I get

What would cause tractor to have good hydro at idle ,then lose it when you throttle up engine speed? thanks for any help Ken in Pa

Is there anything that would cause ignition coils to be short lived? Had to change out one again on the 1250 to till today Seems like I change one every year now The tractor hardly sees any use since the supers moved in Thanks Ken in Pa Is there a way to meter these coils?

Rebuilt carb seems to run OK now thanks Mike and Vince

Changed points and condensor it will run a while and quit,run and quit so I took the carb off and will rebuild it and change filter Does that make sense for these symptons Thanks Ken in Pa

I had put new points in my 1250 last fall and it was running when I parked it &covered it for the winter Now I can't get fire to the points While removing the points I get spark when they touch the push pin but not against the engine block What gives? Thanks Ken in Pa

Geezer my 2082 had a bad ignition switch when it acted like that

vince, he can't afford to feed you three He just spent all his money for the trailerBesides Ray wouldn't eat in something pulled by a Ford Have a good day all I'm going for a double root canal life don't get no better Ken in Pa

ALRIGHT Todd!!!

Scott That kind of stuff happens when we hit 2nd or 3rd childhood Take care Ken in Pa

Yes its a loader projectand that is exactly what I needed to know I also got the Northern pump could be the same one Thanks Jim Am going to Georgia tomorrow for a wedding so it"ll be on hold for a while

Am i right that the front PTO on Cubs turn CCW as you look at it from the front? I have a bi-directional hydro pump so does it matter which port is suction or pessure as far as its rotation Thanks Ken in Pa

Bill I'll give it a " shot " next time Thanks

Jesse it stayed running so I guess I'll check the filter and fuel lines Gas is pretty fresh Thanks Ken in Pa

My 1882 snow duty tractor sat out covered with a tarp for a week or two Has been down to zero most of that time This afternoon is about 32 Had to use starting fluid twice to start it was turning over great as I kept battery maitainer on it Shold I be looking for a fuel pump Thanks Ken in Pa

Vince, pretty fancy on the pins That's a little(lot) out of my capabilities Will have to get pics up soon Been too short on time and money lately to do much Take care! Ken in Pa

Dale I tried disconnecting the ign switch then plugged the engine harness in and it would die.I then took a pice of wire and took the thee wires in that plug one at a time with the jumper Only one mames it stall and its yellow into the harness which shows going to seat switch as you suspected Will c...

Don't get your hopes up Dave -He's probably not gonna fire Ya

Brian,I can relate to that I've got a pile of logs stacked in front yard that needs cut ,split,and hauled in It's covered with 12/14 inches of the white stuff Can't get at it to cut Every time the oil heat kicks on I cring and see dollar signs going up the flue Ken in Pa

Put new plugs in 1882 and disconnected plug going to magneto coil and rectifier -tractor fires and runs As soon as I plug wires back in it back fires pops and quits and if I try to start with plugged in it really back fires and pops with no start Any suggestions where to look next? at least I know n...