Thank you Tom. That's good thinking.
Prices are all over the place on that clip but they are still out there.
The little tang at the right end is prone to break off from what I've seen.
Search found 1308 matches
- Thu Oct 27, 2022 11:03 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: NLA part
- Replies: 6
- Views: 1730
- Thu Oct 27, 2022 11:45 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: NLA part
- Replies: 6
- Views: 1730
NLA part
Does anyone have a source for this? Not the best design ever, the retaining ear tends to break off over time or the clip may just fall off no matter how firmly I think I have it installed.
Used to able to get them but that's no longer the case so it may seem.- Fri Oct 21, 2022 12:43 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
I picked up this dual purpose hitch on line. It's very nicely made and well thought out. DSCN0504.JPG Now I can pull around my wagon or move my 5 X 8 trailer if need be. I'm glad tat I was able to track down those 12-24 self tapping bolts too- those threads in the frame were all in good shape and it...
- Sun Oct 16, 2022 10:24 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Ready!
- Replies: 5
- Views: 1985
Re: Ready!
Ready. Not early. Paul, you got the right idea. Thanks for the inspiration.
We can get snow before Halloween around here- Sat Oct 15, 2022 11:59 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: Ready!
- Replies: 5
- Views: 1985
Re: Ready!
Funny Farm was filmed in Townshead, VT. fifteen miles from my home. The movie set called for a gazebo on the village green and they built one just for the movie. It remains there till this day. The diner sequence was filmed at the Dam Diner just up the road. Hey, I'm workin on it Ok? :lol: DSCN0499....
- Sat Oct 15, 2022 10:13 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
All I want to do is wrap up the few remaining details on this project and put this thing to bed for the Winter turn key ready for Spring mowing but noo- I had a bad time getting the front PTO on, it would have been so much nicer to work on when the engine was up on the bench but I was lacking the pa...
- Sat Oct 15, 2022 9:18 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: #1 wagon
- Replies: 9
- Views: 2291
Re: #1 wagon
So this is the first time actually pulling the wagon around with something. I'm pleased with the way it turned out.
Whoever came up with the idea for this pull back chain really had their thinking cap on. It sure comes in handy.
- Fri Oct 14, 2022 9:55 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: #1 wagon
- Replies: 9
- Views: 2291
Re: #1 wagon
One of our members has asked me to take sizes for the corner stake pockets. I'm attaching photos. The bracket is 3/16" x 1" mild steel. it appears to be cad coated. DSCN0486.JPG Inside to inside DSCN0488.JPG Inside to bend DSCN0489.JPG Edge to hole CL DSCN0490.JPG Edge to hole CL DSCN0491.JPG
- Thu Oct 13, 2022 11:26 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: #1 wagon
- Replies: 9
- Views: 2291
Re: #1 wagon
I probably should have taken a bit more time and thought about this a little better. In the end it did not matter anyway. I did not like the way the tongue was resting on the hitch plate. I decided to add on a extended length. It fits inside the tongue like a glove. The tongue is now sandwiched toge...
- Wed Oct 12, 2022 8:57 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: #1 wagon
- Replies: 9
- Views: 2291
Re: #1 wagon
it's all right. I'm all done with that thing. Should have made it longer though.
- Tue Oct 11, 2022 10:16 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: #1 wagon
- Replies: 9
- Views: 2291
Re: #1 wagon
Thanks guys. The tongue on this trailer has sustained it's share of serious damage over the years. I intend to place this into light to medium duty service around the property and driveway. DSCN0473.JPG I'm going to pass with the welding on this and fabricate a mounting plate that makes use of the f...
- Thu Oct 06, 2022 3:25 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
Hey this one runs real strong. I ran it up the driveway a couple of times in third gear at full throttle and it liked it. No smoke either. Everything doing what it's supposed to including the charging system. There are still issues to be sorted with the basket pulley, PTO, and exhaust however minor ...
- Thu Oct 06, 2022 11:03 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
I made good Morning progress with 5 days off from work still ahead of me.
This one could be a runner before I had expected.- Tue Oct 04, 2022 12:38 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
Charlie who only knows for how long. It runs real strong. But it's only a boat anchor at this point. The brown truck rolled into my drive today. Of course the cats had to get their piece of the action in :lol: DSCN0463.JPG I'll get back on that soon enough, right now prepping for the Winter is the f...
- Tue Oct 04, 2022 10:02 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: #1 wagon
- Replies: 9
- Views: 2291
#1 wagon
Well I have this old wagon rolling around on it's own two feet now. Pretty good too. DSCN0456.JPG I'll never know why somebody did this. They look like snow thrower wheels maybe. Anyhow massive fail for sure. Not even the right hub size. DSCN0457.JPG Someone probably needed wheels for an 'O' I guess...
- Sun Oct 02, 2022 10:11 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
A little bit at a time. Yesterday I came home with this IH number stamped muffler. DSCN0453.JPG This left hand cover bracket was missing and I picked this one up for a quarter. DSCN0452.JPG Oddly enough he did not have the right side bracket so I suppose that it was meant to be. The starter generato...
- Wed Sep 28, 2022 10:39 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
This one cleaned up pretty easy. Over the years I've had a couple that were much worse. You might as well had been chasing a thread in a rock.
- Sun Sep 25, 2022 10:52 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
No more of those things for me now, I'm finding the one to be quite enough! The factory engine will be going back in and it's undergoing the same treatment that other one did. I keep a special modified (bent) wrench around to get at those pesky carb bolts, it is really too handy of a thing to do wit...
- Fri Sep 23, 2022 3:03 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
This little 241 runs very strong. It started right up. DSCN0421.JPG It has a very smooth idle and great throttle up response. No smoke at all, even when it first touched off. I did not touch the head or the valves.I ran it for just over a half hour. It's cool to get long dormant stuff going again. D...
- Thu Sep 22, 2022 10:27 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
While I'm waiting on parts I'm gonna try getting this blue lump running. When rotated by hand it makes all the right blowing and sucking sounds so it just may have a chance. DSCN0420.JPG The coil, condenser, and spark wire all check out good. New points, push rod, and plug. The carb is rebuilt. The ...
- Sun Sep 18, 2022 2:22 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
Today was about getting the front end proper. Clean and tighten up everything. Change out the broken zerk fitting and lubricate.
Changed out the oil in the rear end and on both those engines. Little much else to do at this point without new parts.- Fri Sep 16, 2022 5:40 pm
- Forum: The Coffee Shop
- Topic: Ham and CB chatter
- Replies: 33
- Views: 13900
Re: Ham and CB chatter
Good topic Mike, there's got to be folks here that can chime in here to that! I still have my first base station. It's a 1959 RCA Mk. 9 nine channel. RF output was through one half side of a single 6GH8 tube so it was not exactly a powerhouse, 4 and 1/2 watts peak if I recall. DSCN0416.JPG The mic i...
- Fri Sep 16, 2022 4:40 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
The drive shaft is in very nice shape. The rear connector was obliterated. This obviously was from the engine not being bolted down. The front pilot bushing was mutilated too. I replaced the rear connector. When I make these things I like to add provision for a screw in grease fitting. I think it he...
- Fri Sep 16, 2022 12:30 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
It's a lovely day outside. Some hot soap and water, white rubbing compound, and wax can go a long way.
Someone did a pretty decent axle bushing repair.
This one did not wander far from home.
And it has half a lighter.- Fri Sep 16, 2022 9:47 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
This is cleaning up nice. there was lots of grease and pine needles. DSCN0400.JPG Hey, I don't have to lay down on the ground to get at the drive shaft!!! DSCN0401.JPG I'm going through my spare parts to see what I have and what I need to order- DSCN0405.JPG I have the little S-120 playing and it's ...
- Thu Sep 15, 2022 7:48 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
A most impressive collection of short wave gear from the golden age of ham for sure there Dave! I am very fond of the old vintage rigs produced by Hallicrafters, Zenith, and Fischer from back in a time when made in USA meant something. Try finding an American made radio today, good luck with that. W...
- Wed Sep 14, 2022 8:25 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
The variable BFO control on my entery level S- 120 does exactly what you talking about, it's a really nice feature for such a budget minded rig. I recently had it replaced along with the all other service work that was performed. IMG_7744.JPG I picked up the S-40B because the price was right but rea...
- Tue Sep 13, 2022 10:36 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
Thank you again Joe. So this one uses the dual spring, non braking center button then. It was so messed up that I was not clear with what was going on. It can wait for now, I'm focusing on making a running and driving machine first- Someone did put a real effort into that muffler though- DSCN0392.JP...
- Mon Sep 12, 2022 10:58 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
Thank you Joe. I was unsure of what that PTO setup was with so much smashed up.
Moving forward a bit at a time-
Moving forward a bit at a time-
- Mon Sep 12, 2022 10:42 am
- Forum: Cub Cadets and Shooting the Breeze
- Topic: And I came home with two dollars
- Replies: 46
- Views: 16077
Re: And I came home with two dollars
The goal is to get it back together and running properly before the foul weather sets in. I have everything on hand to get the clutch and engine back in A#1 condition. The carbs and clutch discs are in my carry bag and I'll toss the 2 disassembled carb bodies into the wash tank and resurface the dis...