Search found 70 matches
- Fri Apr 27, 2012 6:24 am
- Forum: CCC and MTD Built Cub cadets
- Topic: Turf vs ag tire opinions
- Replies: 7
- Views: 6564
Re: Turf vs ag tire opinions
OK lets switch the job to pulling a dirt plow instead of pushing snow.
- Thu Apr 26, 2012 8:49 pm
- Forum: CCC and MTD Built Cub cadets
- Topic: Turf vs ag tire opinions
- Replies: 7
- Views: 6564
Turf vs ag tire opinions
I just picked up a new set of ag tires for my 1572. Here is the question. For plowing snow whitch is better turf tires filled with fluid and chains or ag tires filled with fluid. Wheel weights on both.
- Thu Apr 26, 2012 8:43 pm
- Forum: CCC and MTD Built Cub cadets
- Topic: Wiring Questions
- Replies: 4
- Views: 4960
Re: Wiring Questions
Steve thanks for the info. Any way I can get a diagram it's not my area of expertise. I found the switch at grainger they also had a ton of relays but I have no idea which to use or how. again I appreciate the help.
Charles
Charles
- Thu Apr 26, 2012 4:20 pm
- Forum: CCC and MTD Built Cub cadets
- Topic: Wiring Questions
- Replies: 4
- Views: 4960
Wiring Questions
Not sure where else to post this. I have a DR power grader this thing works great. I use it to condition my 300ft stone driveway. The other day it stopped working. It has a 12v wireless actuator that raises and lowers it. It seems the reciever is bad a new one is $175.00 plus shipping and not availa...
- Sun Apr 15, 2012 7:13 pm
- Forum: CCC and MTD Built Cub cadets
- Topic: 1572 hydro
- Replies: 1
- Views: 2396
1572 hydro
Can anyone tell me if there is anyway to adjust or tighten the hydro lever. Whenever I am mowing the lever will slowly creep foward until it is at full speed. I know there is a stop that can be set but it moves right past the stop as the lever is tigfht to the outside of the slot not the inside. Oth...
- Sat Mar 31, 2012 6:20 pm
- Forum: CCC and MTD Built Cub cadets
- Topic: 2070 PTO help
- Replies: 3
- Views: 3407
Re: 2070 PTO help
Kevin I just had the same problem last week with my 1572. If you unplug the PTO and it does not blow your wires should be fine. The problem should be in the field. In my case the magnet broke free from the backing plate and broke the wires. I found a new field but the bearing in my armature seemed b...
- Tue Mar 27, 2012 7:42 pm
- Forum: CCC and MTD Built Cub cadets
- Topic: 1572 pto problems
- Replies: 6
- Views: 5278
Re: 1572 pto problems
I took the old PTO off the magnet had broken away from the triangular backing plate. The spot welds were broken. Also the armature had been repaired with some welds and the bearing in the pulley was a little rough so I replaced the whole clutch. I installed it this morning it seems to be working gre...
- Sun Mar 25, 2012 6:56 am
- Forum: CCC and MTD Built Cub cadets
- Topic: 1572 pto problems
- Replies: 6
- Views: 5278
Re: 1572 pto problems
not sure what the air gap is. How can I test the current if it keps blowing the fuse?
Thanks for the help
Thanks for the help
- Sat Mar 24, 2012 5:17 pm
- Forum: CCC and MTD Built Cub cadets
- Topic: 1572 pto problems
- Replies: 6
- Views: 5278
1572 pto problems
I was cutting grass today I hit a bump and the pto turned off and would not come back on. I discovered the fuse had blown every time I turn on the pto the fuse blows. I unhooked the pto at the plug and turned on the switch and the fuse did not blow. Any ideas is the pto field shot? can I just change...
- Sun Feb 26, 2012 8:31 pm
- Forum: Cub Cadets and Shooting the Breeze
- Topic: # 4 cart questions
- Replies: 4
- Views: 5640
# 4 cart questions
I just got a # 4 cart. Anybody know what the full modal # is or where I can get a parts list. Also a set of replacement decals. Any idea what these carts are worth?
Thanks
DrV
Thanks
DrV