gona turn a 102 into a puller
-
- Posts: 44
- Joined: Sat Jan 01, 2011 6:48 pm
- First and Last Name: Brandon C Bungard
- Location: Waynesburg ohio
gona turn a 102 into a puller
I have been wanting a 122 for a while now and I found one and was able to get a very good deal on it. (Thanks again david). Its a 102. I was wondering if I'm gona have to gut the frame to fit a 14 hp kohler in it. Also I was wondering if any of u guys have some pics of pullers that are this style. I found a pic of a 122 and a really like the tractor. Does anyone on this forum own this tractor?
Beat it like it owes you money$$
- Farmallgray
- Posts: 1021
- Joined: Mon Sep 06, 2010 7:39 am
- First and Last Name: Todd Markle
- Location: Spring Mills, Pa
Re: gona turn a 102 into a puller
Brandon,
If you want to use the 14 flywheel, you will have to notch the frame like on a 147. But you could change the bearing plate, flywheel and blower housing to ones from a 10 or 12 then it will drop right in.
If you want to use the 14 flywheel, you will have to notch the frame like on a 147. But you could change the bearing plate, flywheel and blower housing to ones from a 10 or 12 then it will drop right in.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
http://www.youtube.com/user/farmallgray