Rear End/ Carriers

This is your place for high horsepower and traction!

Rear End/ Carriers

Postby KadillaK » Tue Nov 22, 2011 9:37 pm

Just wondering what people are running for a carrier/axles/ axle tubes in their pullers. I blew up my coarse spline and have a fine spline with 30 mm axles out of a hydro that i would like to replace it with. Any one do this? Any advise?

Thanks
KadillaK
 
Posts: 6
Joined: Fri Jun 03, 2011 10:32 pm
City and State: Green Bay, WI
First and Last Name: Kraig Kadletz

Re: Rear End/ Carriers

Postby bperegrine » Wed Nov 23, 2011 10:17 am

Dodge 7.25 rear carrier and axles. Axles will need to be machined and cut down and end plates welded and axle housings will need to be bored for larger needle bearing. Usually 1 1/8".
User avatar
bperegrine
 
Posts: 23
Joined: Tue Sep 07, 2010 7:14 am
City and State: Westboro, Missouri
First and Last Name: Brian Peregrine

Re: Rear End/ Carriers

Postby Farmallgray » Wed Nov 23, 2011 4:29 pm

The 1" fine spline axles will drop right in without any machine work. Any other scenario requires machine work.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
User avatar
Farmallgray
Moderator
 
Posts: 1021
Joined: Mon Sep 06, 2010 7:39 am
City and State: Spring Mills, Pa
First and Last Name: Todd Markle

Re: Rear End/ Carriers

Postby KadillaK » Wed Nov 23, 2011 7:37 pm

I would like to find some 1" fine spline axles, but what i have to work with is the 30mm. I looked at McMaster Carr and found seals, but couldn't find any needle bearings. would there be any other place to look for bearings?
KadillaK
 
Posts: 6
Joined: Fri Jun 03, 2011 10:32 pm
City and State: Green Bay, WI
First and Last Name: Kraig Kadletz

Re: Rear End/ Carriers

Postby Farmallgray » Thu Nov 24, 2011 7:54 am

If you have the axle housings from the 30mm setup you can shorten the flange on the left one to work with the cast iron transaxle.
IMG_2912.JPG
You do not have the required permissions to view the files attached to this post.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
User avatar
Farmallgray
Moderator
 
Posts: 1021
Joined: Mon Sep 06, 2010 7:39 am
City and State: Spring Mills, Pa
First and Last Name: Todd Markle

Re: Rear End/ Carriers

Postby KadillaK » Thu Dec 22, 2011 10:47 pm

How did you machine that tube down?
KadillaK
 
Posts: 6
Joined: Fri Jun 03, 2011 10:32 pm
City and State: Green Bay, WI
First and Last Name: Kraig Kadletz

Re: Rear End/ Carriers

Postby Farmallgray » Fri Dec 23, 2011 8:19 am

I rough cut it with a band saw then faced it on a lathe.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
User avatar
Farmallgray
Moderator
 
Posts: 1021
Joined: Mon Sep 06, 2010 7:39 am
City and State: Spring Mills, Pa
First and Last Name: Todd Markle

Re: Rear End/ Carriers

Postby Linger » Mon Apr 16, 2012 12:59 am

I used the 30mm setup on a cast rear i just opened up the tubes to accept the bearings from the donor. looks stock til u take the dif cover off to reveal that beefy carrier. sorry dont have any pics handy
Linger
 
Posts: 1
Images: 3
Joined: Mon Mar 26, 2012 3:58 pm
City and State: Clinton, OH
First and Last Name: Zachary Ling

Re: Rear End/ Carriers

Postby rickyn » Thu Apr 19, 2012 5:49 pm

farmallgray I got that pinion out of that rear if you are still interested in it Thanks Ricky
rickyn
 
Posts: 12
Joined: Fri Jun 24, 2011 1:58 pm
City and State: Denton, MD
First and Last Name: Ricky Nichols

Re: Rear End/ Carriers

Postby DaveKamp » Tue May 21, 2019 10:47 am

Last night I verified that a Ford 7.5" Limited Slip diff WILL FIT inside an IHCC cast iron housing.

I haven't made the LH bearing support or outer tubes yet, but stay tuned.
Yes, I'm a Mad Scientist... but I'm usually happy, even when things ain't goin right.
DaveKamp
 
Posts: 400
Joined: Mon Sep 06, 2010 10:19 am
City and State: LeClaire, Ia
First and Last Name: Dave Kamp

Re: Rear End/ Carriers

Postby RandyLittrell » Tue May 28, 2019 11:24 am

DaveKamp wrote:Last night I verified that a Ford 7.5" Limited Slip diff WILL FIT inside an IHCC cast iron housing.

I haven't made the LH bearing support or outer tubes yet, but stay tuned.



That could work for non pullers too!




Randy
RandyLittrell
 
Posts: 39
Joined: Fri Sep 02, 2011 11:13 pm
City and State: Kansas City, Mo.
First and Last Name: Randy Littrell

Re: Rear End/ Carriers

Postby DaveKamp » Mon Jun 24, 2019 9:05 pm

yep, it sure could... and yes, it does require some machine work, but it certainly does fit, and I've meticulously noted and photo'd it for anyone that has a sincere sickness like mine:

viewtopic.php?f=4&t=7656
Yes, I'm a Mad Scientist... but I'm usually happy, even when things ain't goin right.
DaveKamp
 
Posts: 400
Joined: Mon Sep 06, 2010 10:19 am
City and State: LeClaire, Ia
First and Last Name: Dave Kamp


Return to Pullers

Who is online

Users browsing this forum: No registered users and 1 guest