Vogts Perfomance Engineering

This page is for our vendors that help us maintain our great little tractors. Support Them!
Post Reply
dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Vogts Perfomance Engineering

Post by dvogtvpe »

I've got allot of used Cub Cadet parts from over 180 Cub Cadets that I've parted out, I also do transaxle rebuilding for pulling, plowing or just a restoration, clutch and Kohler K series rebuilding are also available. I do ship parts, I do take pay-pal . I do travel the NQS pulling curcuit during the winter and can bring parts with me if arrangements are made ahead of time. you can check oout the dates at www.nqspulling.com
email dvogtvpe@yahoo.com
phone 414-573-7978 Don Vogt

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

items on this post were sold
Last edited by dvogtvpe on Sun Aug 26, 2012 10:57 am, edited 3 times in total.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

82 series creeper. one of the aluminum one they fit the cast reaends also. e-mail dvogtvpe@yahoo.com or call 414-573-7978 Don
Last edited by dvogtvpe on Mon Sep 17, 2012 5:41 pm, edited 1 time in total.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

dadforsale 036.jpg
quiet line exhaust. all the shrouds, muffler. aluminum adaptor in good shape. no broken or striped out bolts
Last edited by dvogtvpe on Sun Aug 26, 2012 10:58 am, edited 1 time in total.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

16 hp Briggs twin parts from a 582; starter, flywheel, ign. , intake and carb, exhaust, shielding, PTO , charging system ect.
Last edited by dvogtvpe on Fri Jan 04, 2013 10:09 am, edited 1 time in total.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

dadforsale 041.jpg
dadforsale 042.jpg
nice QL dash, corners are good, just a side wear spot on the right side. $75

dadforsale 040.jpg
nice IH steering wheel $50
dadforsale 038.jpg
Kohler starters $50 each
Last edited by dvogtvpe on Sun Aug 26, 2012 11:00 am, edited 1 time in total.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

also have a large selection of IH headed bolts. pay-pal is accepted can also bring parts to any NQS pull. see the schedule at www.nqspulling.org

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

nice QL dash plate to go with the nice dash listed above. $25

QL motor mount plate, modifyed as per Cub Cadet $40
Attachments
dadforsale 046.jpg
dadforsale 051.jpg

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

cub cadet 100 with loader

Post by dvogtvpe »

SOLD
Last edited by dvogtvpe on Fri Jan 04, 2013 10:10 am, edited 2 times in total.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

tiller gear box and mounting bracket

Post by dvogtvpe »

this item sold
Last edited by dvogtvpe on Fri Jan 04, 2013 10:08 am, edited 1 time in total.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

items in this section are sold
Last edited by dvogtvpe on Fri Jan 04, 2013 9:52 am, edited 2 times in total.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

dadforsale 093.jpg
a QL IH gas gauge you can road PN 61635C2 $20

also have a complte hyd lift from a 782 to update your 682 to hyd lift $175
Kohler KT 17 coil $25
KT 17 adjustable main carb $40
WF sleave hitch , complete $125
Last edited by dvogtvpe on Thu Oct 04, 2012 6:43 pm, edited 1 time in total.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

dadforsale 099.jpg
parts to convert your 682 to hydrlic lift $175
Last edited by dvogtvpe on Fri Jan 04, 2013 9:53 am, edited 1 time in total.

wdeturck

Re: Vogts Perfomance Engineering

Post by wdeturck »

Don; I think you can delete your own posts. On the right near the top is an X next to"EDIT" click on it to delete any post. You missed the price of the "Gas Gauge" which you can add from edit. If you can't delete your posts I will delete them. I only deleted the post under SOLD.

The check is in the MAIL. my address is 53 Morris St., Oakmont,, PA 15139. Nice talking with you.

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

a few snow blower parts
complete gear box for a QA blower $100
pulley for gear box 485-247 R91 $25

misc snow blower gear box parts
475-606 R1 Shaft for gear box $25
475-602 R1 shaft for gear box $25
475-600 R1 gear $35
465-604 R1 gear $35

12 hp K301 kohler , runs good. rebuilt carb. came out of a NF.no smoke or knocks $180
10 hp K241 kohler , runs good, rebuilt carb . came out of a 109 , no smoke or knocks. $150

I'll be going to the Columbus Winter Nationals January 10--12 . I have room to bring parts along. please call or text me at 414-573-7978 or PM me or e-mail at dvogtvpe@yahoo.com

dvogtvpe
Posts: 20
Joined: Sun Sep 12, 2010 4:15 pm
First and Last Name: Don Vogt
Location: Campbellsport , WI

Re: Vogts Perfomance Engineering

Post by dvogtvpe »

DSCN1032.JPG
I have several decent used PTO's $60 + shipping of $10 within the continental 48
DSCN1037.JPG
I have several QL electric PTO's $100 + $10 for shipping
DSCN1036.JPG
nice #30 14 hp QL carb , needs rebuild and cleaning $80 + $10 shipping I will include a Kohler carb rebuild kit in that price

User avatar
cheifsix
Posts: 150
Joined: Thu May 03, 2012 3:28 pm
First and Last Name: Matthew Shockley
Location: Roundhill, KY

Re: Vogts Perfomance Engineering

Post by cheifsix »

PM sent
Matt Shockley
Barksprings Ridge Farm&Antiques
'67 102,'67 125,'69 104,'70 106,'70 107, '70&'71 126
Brinly:10" plow, 3 discs, box scraper, cultivator
'63 Sears Suburban 725
'00 CaseIH c50

Post Reply