Page 1 of 1
Vogts Perfomance Engineering
Posted: Sat Apr 30, 2011 7:49 pm
by dvogtvpe
I've got allot of used Cub Cadet parts from over 180 Cub Cadets that I've parted out, I also do transaxle rebuilding for pulling, plowing or just a restoration, clutch and Kohler K series rebuilding are also available. I do ship parts, I do take pay-pal . I do travel the NQS pulling curcuit during the winter and can bring parts with me if arrangements are made ahead of time. you can check oout the dates at
www.nqspulling.com
email
dvogtvpe@yahoo.com
phone 414-573-7978 Don Vogt
Re: Vogts Perfomance Engineering
Posted: Sat Aug 06, 2011 6:26 pm
by dvogtvpe
items on this post were sold
Re: Vogts Perfomance Engineering
Posted: Thu Sep 22, 2011 10:46 am
by dvogtvpe
82 series creeper. one of the aluminum one they fit the cast reaends also. e-mail
dvogtvpe@yahoo.com or call 414-573-7978 Don
Re: Vogts Perfomance Engineering
Posted: Thu Nov 10, 2011 8:04 pm
by dvogtvpe
quiet line exhaust. all the shrouds, muffler. aluminum adaptor in good shape. no broken or striped out bolts
Re: Vogts Perfomance Engineering
Posted: Fri Mar 09, 2012 5:00 pm
by dvogtvpe
16 hp Briggs twin parts from a 582; starter, flywheel, ign. , intake and carb, exhaust, shielding, PTO , charging system ect.
Re: Vogts Perfomance Engineering
Posted: Sun Apr 08, 2012 7:39 pm
by dvogtvpe
nice QL dash, corners are good, just a side wear spot on the right side. $75
nice IH steering wheel $50
Kohler starters $50 each
Re: Vogts Perfomance Engineering
Posted: Sun Apr 08, 2012 7:42 pm
by dvogtvpe
also have a large selection of IH headed bolts. pay-pal is accepted can also bring parts to any NQS pull. see the schedule at
www.nqspulling.org
Re: Vogts Perfomance Engineering
Posted: Thu Apr 19, 2012 6:06 pm
by dvogtvpe
nice QL dash plate to go with the nice dash listed above. $25
QL motor mount plate, modifyed as per Cub Cadet $40
cub cadet 100 with loader
Posted: Sun Aug 26, 2012 11:12 am
by dvogtvpe
SOLD
tiller gear box and mounting bracket
Posted: Sun Aug 26, 2012 12:27 pm
by dvogtvpe
this item sold
Re: Vogts Perfomance Engineering
Posted: Fri Aug 31, 2012 3:58 pm
by dvogtvpe
items in this section are sold
Re: Vogts Perfomance Engineering
Posted: Thu Sep 13, 2012 5:30 pm
by dvogtvpe
a QL IH gas gauge you can road PN 61635C2 $20
also have a complte hyd lift from a 782 to update your 682 to hyd lift $175
Kohler KT 17 coil $25
KT 17 adjustable main carb $40
WF sleave hitch , complete $125
Re: Vogts Perfomance Engineering
Posted: Fri Sep 28, 2012 8:41 am
by dvogtvpe
parts to convert your 682 to hydrlic lift $175
Re: Vogts Perfomance Engineering
Posted: Sun Sep 30, 2012 7:20 am
by wdeturck
Don; I think you can delete your own posts. On the right near the top is an X next to"EDIT" click on it to delete any post. You missed the price of the "Gas Gauge" which you can add from edit. If you can't delete your posts I will delete them. I only deleted the post under SOLD.
The check is in the MAIL. my address is 53 Morris St., Oakmont,, PA 15139. Nice talking with you.
Re: Vogts Perfomance Engineering
Posted: Fri Jan 04, 2013 10:00 am
by dvogtvpe
a few snow blower parts
complete gear box for a QA blower $100
pulley for gear box 485-247 R91 $25
misc snow blower gear box parts
475-606 R1 Shaft for gear box $25
475-602 R1 shaft for gear box $25
475-600 R1 gear $35
465-604 R1 gear $35
12 hp K301 kohler , runs good. rebuilt carb. came out of a NF.no smoke or knocks $180
10 hp K241 kohler , runs good, rebuilt carb . came out of a 109 , no smoke or knocks. $150
I'll be going to the Columbus Winter Nationals January 10--12 . I have room to bring parts along. please call or text me at 414-573-7978 or PM me or e-mail at
dvogtvpe@yahoo.com
Re: Vogts Perfomance Engineering
Posted: Sun Mar 31, 2013 10:05 am
by dvogtvpe
I have several decent used PTO's $60 + shipping of $10 within the continental 48
I have several QL electric PTO's $100 + $10 for shipping
nice #30 14 hp QL carb , needs rebuild and cleaning $80 + $10 shipping I will include a Kohler carb rebuild kit in that price
Re: Vogts Perfomance Engineering
Posted: Mon Apr 01, 2013 1:15 pm
by cheifsix
PM sent