Xtreme Motorworks / Cat 0 Parts, Dual Wheels, Custom Parts

This page is for our vendors that help us maintain our great little tractors. Support Them!
Post Reply
aschmidt
Posts: 5
Joined: Sat Sep 11, 2010 2:00 am
First and Last Name: Aaron Schmidt
Location: Detroit Lakes, MN

Xtreme Motorworks / Cat 0 Parts, Dual Wheels, Custom Parts

Post by aschmidt »

Xtreme Motorworks - Your online source for Hitches, Dual Wheel Adaptors, Category 0 - 3 Point Parts and Hitches and tons more! We make parts for most Cub Cadet Tractors and are adding new parts all the time.

Visit our web site: http://www.xtrememotorworks.com
Last edited by aschmidt on Sat May 19, 2012 8:19 pm, edited 1 time in total.

User avatar
J Hayes
Posts: 919
Joined: Mon Sep 06, 2010 6:20 pm
First and Last Name: Jim Hayes
Location: Apollo Pa

Re: Xtreme Motorworks / Cat 0 Parts, Dual Wheels, Custom Par

Post by J Hayes »

Welcome Aaron Glad ya made it back !
My mind wants a Divorce ?? .

aschmidt
Posts: 5
Joined: Sat Sep 11, 2010 2:00 am
First and Last Name: Aaron Schmidt
Location: Detroit Lakes, MN

Re: Xtreme Motorworks / Cat 0 Parts, Dual Wheels, Custom Par

Post by aschmidt »

Reproduction Brinly Gard-n-Cart
Brinly Gard-n-cart
Brinly Gard-n-cart
Just got these done and they are a spitin image of the original ones. They mount on the Originals, 70's and 100, 102,104and maybe some otheres
Kits come unpainted and ready to paint.

---------------------------------------------------------------------------------------------
82 Series 3 Point
82 Series 3 Point
Cub Cadet 82 Series 3 Point

Reproduction Category 0 - 3 Point lift system. The kit is designed to work off of the single deck lift system. You can leave your deck on and lock it in the up position while using your 3 point accessories. Complete kit. Retrofit to fit more tractors than the original 190-389 kit by Cub Cadet.

Some major improvements were made to this kit:

1. Double width bushings on the rock shaft to prevent premature wear and failure over time of the main plate.
2. Dual lower holes for the drag link pins, allows you to tailer the height of your lift and change how your equipment pulls.
3. Hole in the middle of the back plate allows you to get to the oil fill / check hole without having to dismantle the 3 point.
4. Holes in the upper left corner on the back face to allow quick attach hydraulics to be added - re-route your front ones to the rear or add in a set.
5. The upper 3rd link attachment brackets are welded on instead of (2) 3/8" bolts holding them on. Much stronger than stock.
6. If you have a newer tractor, the hole for the rear deck adjustment rod it pre-drilled and located.
7. Dual lower hitch holes to accommodate the 3 and 5 bolt hitches - depending if you have the aluminum or cast iron rear end.
8. Whole rear frame is made out of a whole guage heavier material.

Will not work on tractors with PTO. Receiver hitch sold seperately.

---------------------------------------------------------------------------------------------
Sleeve Hitch kit
Sleeve Hitch kit
Sleeve Hitch Kits - $158 includes shipping to your door.

Reproduction of the original sleeve hitch used on many cub cadets - Tractor Bracket sold seperately.

---------------------------------------------------------------------------------------------
Snow Thrower Wings
Snow Thrower Wings
Snow Thrower Wings - $78 includes shipping to your door.

Adds 4" to each side of the QA-36 and QA-42 Snow Throwers. Hardware included. Bolt on kit.

---------------------------------------------------------------------------------------------
Drift Cutters
Drift Cutters
Drift Cutters - $58 includes shipping to your door.

Drift Cutters for the QA-36 and QA-42 Snow Throwers. Hardware included. Bolt on kit.
Last edited by aschmidt on Sat May 19, 2012 8:18 pm, edited 1 time in total.

User avatar
red82s
Posts: 126
Joined: Mon Sep 06, 2010 2:45 pm
First and Last Name: Adrian Gitch
Location: Paris, KY

Re: Xtreme Motorworks / Cat 0 Parts, Dual Wheels, Custom Par

Post by red82s »

Aaron asked if I would post a pic of his Cat 0 hitch and tool box I just recently installed on the 782. All I can say is "Awesome quality work"!
Attachments
IMG_0786 (640x470).jpg
Adrian

User avatar
Jlaws
Posts: 1141
Joined: Sun Sep 05, 2010 10:14 pm
First and Last Name: Jess Laws
Location: Independence , Ky

Re: Xtreme Motorworks / Cat 0 Parts, Dual Wheels, Custom Par

Post by Jlaws »

I've bought three of his Cat 0 hitch's for my 982's at different times over the past five years and they all were of great quality . He's made improvements with each one I've purchased , they keep getting better and better .
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .

aschmidt
Posts: 5
Joined: Sat Sep 11, 2010 2:00 am
First and Last Name: Aaron Schmidt
Location: Detroit Lakes, MN

Re: Xtreme Motorworks / Cat 0 Parts, Dual Wheels, Custom Par

Post by aschmidt »

Thanks Guys, got some new stuff that people have been asking for.

Snowblower lift bracktes... fits cyclops and up...
Lift bracket
Lift bracket
Original LIft Rods - Steel and Stainless Steel
LIft Rods
LIft Rods

aschmidt
Posts: 5
Joined: Sat Sep 11, 2010 2:00 am
First and Last Name: Aaron Schmidt
Location: Detroit Lakes, MN

Re: Xtreme Motorworks / Cat 0 Parts, Dual Wheels, Custom Par

Post by aschmidt »

Lots of new parts and FREE shipping for BLACK FRIDAY thu CYBER MONDAY!

Post Reply