Aftermarket Sources for parts...INFO NEEDED

This page is for our vendors that help us maintain our great little tractors. Support Them!
Post Reply
User avatar
Dave C
Web Developer
Posts: 1012
Joined: Mon Sep 06, 2010 7:12 am
First and Last Name: David Chester
Location: Wallingford, CT

Aftermarket Sources for parts...INFO NEEDED

Post by Dave C »

Hi folks if you have found an aftermarket place to get either NLA or hard to find, or suitable replacements please post it here and we will start a ever growing list. If you can list the

description
cub cadet part number
aftermarket source
aftermarket PN if available

thanks webmaster
Trying to save cubs... one at a time.......

User avatar
l palma
Posts: 738
Joined: Mon Sep 06, 2010 9:46 am
First and Last Name: Lew Palma
Location: Montague, N.J.

Re: Aftermarket Sources for parts...INFO NEEDED

Post by l palma »

Dave...
82 series tail lights.
GM part #s 91754 and 91753
The were oringinally on Vega 's and Chevettes and some Pontiacs.

User avatar
Jeff in Pa
Posts: 665
Joined: Sun Sep 12, 2010 8:06 am
First and Last Name: Jeff Derstine
Location: Zionsville,PA

Re: Aftermarket Sources for parts...INFO NEEDED

Post by Jeff in Pa »

I can make parts
viewtopic.php?f=16&t=4974

( delete if not exactly what you wanted here :beer: )

edit--

I'm making brand new shafts out of 4140P alloy steel for the 90* gear boxes for the tillers and snow throwers
Last edited by Jeff in Pa on Tue Jun 03, 2014 6:56 pm, edited 1 time in total.
125 & 125 with hydraulic lift

User avatar
Jlaws
Posts: 1141
Joined: Sun Sep 05, 2010 10:14 pm
First and Last Name: Jess Laws
Location: Independence , Ky

Re: Aftermarket Sources for parts...INFO NEEDED

Post by Jlaws »

Found this on ebay , I ordered a few for my cubs . Looks like the one cub used on NF amp meter gauge .
Cheap price too.
Its chrome plated , but a few seconds in the blast cabinet will fix that .


http://www.ebay.com/itm/Stewart-Warner- ... d6&vxp=mtr
Attachments
Amp Gauge bracket 001.JPG
Amp Gauge bracket 001.JPG (1.1 MiB) Viewed 5529 times
Last edited by Jlaws on Tue Sep 01, 2015 9:54 am, edited 1 time in total.
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .

sacky07
Posts: 82
Joined: Mon Oct 24, 2011 7:56 pm
First and Last Name: Dustin Sacksteder
Location: Brookville. IN

Re: Aftermarket Sources for parts...INFO NEEDED

Post by sacky07 »

this thread needs a bump, I started my own McMaster and napa list. I will post item numbers when confirmed the parts work.

JMotuzick
Moderator
Posts: 1172
Joined: Tue Sep 07, 2010 6:22 pm
First and Last Name: Joe Motuzick
Location: Torrington Ct

Re: Aftermarket Sources for parts...INFO NEEDED

Post by JMotuzick »

narrow frame deck spindle seals Ih part number 473428-r92. CR number 530484

ronniec
Posts: 107
Joined: Mon Sep 06, 2010 11:51 am
First and Last Name: Ronnie Chapman
Location: grand junction michigan

Re: Aftermarket Sources for parts...INFO NEEDED

Post by ronniec »

looking for these Cub Cadet IH-27280-R1

Pin, 3/16 X 5/8 Coiled Spring
have snow must plow

User avatar
Tom Scott
Chief Moderator
Posts: 1762
Joined: Mon Sep 06, 2010 9:11 pm
First and Last Name: Tom Scott
Location: Bentley Springs, Maryland

Re: Aftermarket Sources for parts...INFO NEEDED

Post by Tom Scott »

Ronnie - Common stock item from McMaster-Carr. https://www.mcmaster.com/
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors:  1541, 2135
<><

Post Reply