Hi folks if you have found an aftermarket place to get either NLA or hard to find, or suitable replacements please post it here and we will start a ever growing list. If you can list the
description
cub cadet part number
aftermarket source
aftermarket PN if available
thanks webmaster
Aftermarket Sources for parts...INFO NEEDED
- Dave C
- Web Developer
- Posts: 1014
- Joined: Mon Sep 06, 2010 7:12 am
- First and Last Name: David Chester
- Location: Wallingford, CT
Aftermarket Sources for parts...INFO NEEDED
Trying to save cubs... one at a time.......
- l palma
- Posts: 738
- Joined: Mon Sep 06, 2010 9:46 am
- First and Last Name: Lew Palma
- Location: Montague, N.J.
Re: Aftermarket Sources for parts...INFO NEEDED
Dave...
82 series tail lights.
GM part #s 91754 and 91753
The were oringinally on Vega 's and Chevettes and some Pontiacs.
82 series tail lights.
GM part #s 91754 and 91753
The were oringinally on Vega 's and Chevettes and some Pontiacs.
- Jeff in Pa
- Posts: 665
- Joined: Sun Sep 12, 2010 8:06 am
- First and Last Name: Jeff Derstine
- Location: Zionsville,PA
Re: Aftermarket Sources for parts...INFO NEEDED
I can make parts
viewtopic.php?f=16&t=4974
( delete if not exactly what you wanted here )
edit--
I'm making brand new shafts out of 4140P alloy steel for the 90* gear boxes for the tillers and snow throwers
viewtopic.php?f=16&t=4974
( delete if not exactly what you wanted here )
edit--
I'm making brand new shafts out of 4140P alloy steel for the 90* gear boxes for the tillers and snow throwers
Last edited by Jeff in Pa on Tue Jun 03, 2014 6:56 pm, edited 1 time in total.
125 & 125 with hydraulic lift
- Jlaws
- Posts: 1141
- Joined: Sun Sep 05, 2010 10:14 pm
- First and Last Name: Jess Laws
- Location: Independence , Ky
Re: Aftermarket Sources for parts...INFO NEEDED
Found this on ebay , I ordered a few for my cubs . Looks like the one cub used on NF amp meter gauge .
Cheap price too.
Its chrome plated , but a few seconds in the blast cabinet will fix that .
http://www.ebay.com/itm/Stewart-Warner- ... d6&vxp=mtr
Cheap price too.
Its chrome plated , but a few seconds in the blast cabinet will fix that .
http://www.ebay.com/itm/Stewart-Warner- ... d6&vxp=mtr
- Attachments
-
- Amp Gauge bracket 001.JPG (1.1 MiB) Viewed 5612 times
Last edited by Jlaws on Tue Sep 01, 2015 9:54 am, edited 1 time in total.
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .
-
- Posts: 82
- Joined: Mon Oct 24, 2011 7:56 pm
- First and Last Name: Dustin Sacksteder
- Location: Brookville. IN
Re: Aftermarket Sources for parts...INFO NEEDED
this thread needs a bump, I started my own McMaster and napa list. I will post item numbers when confirmed the parts work.
-
- Moderator
- Posts: 1175
- Joined: Tue Sep 07, 2010 6:22 pm
- First and Last Name: Joe Motuzick
- Location: Torrington Ct
Re: Aftermarket Sources for parts...INFO NEEDED
narrow frame deck spindle seals Ih part number 473428-r92. CR number 530484
-
- Posts: 107
- Joined: Mon Sep 06, 2010 11:51 am
- First and Last Name: Ronnie Chapman
- Location: grand junction michigan
Re: Aftermarket Sources for parts...INFO NEEDED
looking for these Cub Cadet IH-27280-R1
Pin, 3/16 X 5/8 Coiled Spring
Pin, 3/16 X 5/8 Coiled Spring
have snow must plow
- Tom Scott
- Chief Moderator
- Posts: 1776
- Joined: Mon Sep 06, 2010 9:11 pm
- First and Last Name: Tom Scott
- Location: Bentley Springs, Maryland
Re: Aftermarket Sources for parts...INFO NEEDED
Ronnie - Common stock item from McMaster-Carr. https://www.mcmaster.com/
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><