5 millionth
-
- Posts: 30
- Joined: Mon Sep 06, 2010 7:46 pm
- First and Last Name: Kevin Leach
- Location: Climax, MI
5 millionth
I was this replica of the 5 millionth made out of a 1450
If at first you don't succeed, get a bigger hammer!
- BigMike
- Posts: 1351
- Joined: Mon Sep 06, 2010 8:45 pm
- First and Last Name: Mike Andrews
- Location: Niles,Michigan
Re: 5 millionth
"I was this replica of the 5 millionth made out of a 1450"
And when you grew up you became a Cyclops?
And when you grew up you became a Cyclops?
-
- Posts: 30
- Joined: Mon Sep 06, 2010 7:46 pm
- First and Last Name: Kevin Leach
- Location: Climax, MI
Re: 5 millionth
fingers don't listen any better here than they do in chat, I meant to say "I saw this", all I can say now is "OOPS"
If at first you don't succeed, get a bigger hammer!
- Racenitro
- Posts: 354
- Joined: Tue Sep 07, 2010 10:31 pm
- First and Last Name: Frank S. Morski
- Location: O'Fallon, Il
Re: 5 millionth
Kevin..
That looks more like a Wide Frame not a Quiet Line.....
That looks more like a Wide Frame not a Quiet Line.....
- Farmallgray
- Posts: 1021
- Joined: Mon Sep 06, 2010 7:39 am
- First and Last Name: Todd Markle
- Location: Spring Mills, Pa
Re: 5 millionth
Could be a combination of WF and QL parts. The frame is QL because of the serial # tag location.
The lower grill is from a 1X8 or 1X9.
The lower grill is from a 1X8 or 1X9.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
http://www.youtube.com/user/farmallgray
- Merk
- Posts: 155
- Joined: Mon Sep 06, 2010 9:24 am
- First and Last Name: Dale Merkle
- Location: Middle Point, Ohio 45863
Re: 5 millionth
The serial number for my 149 is in the same area as the one in the picture. One area of difference between the Wide Frame and Quiet Line is the motor mount area. There may be more.
- rharris
- Posts: 47
- Joined: Sun Sep 05, 2010 10:27 pm
- First and Last Name: Rick Harris
- Location: Independence, KY
Re: 5 millionth
WF and QL brake pedals are different too. just for reference.
Building my Cub Cadet fleet....one bolt at a time.
- Racenitro
- Posts: 354
- Joined: Tue Sep 07, 2010 10:31 pm
- First and Last Name: Frank S. Morski
- Location: O'Fallon, Il
Re: 5 millionth
Looked like to me that the Hood nose has the center piece....That was why I figured WF over Q/L....but it probably is a mix of both...
- Farmallgray
- Posts: 1021
- Joined: Mon Sep 06, 2010 7:39 am
- First and Last Name: Todd Markle
- Location: Spring Mills, Pa
Re: 5 millionth
Yeah, I don't see a hydro speed control lever on the left, and it looks like there is one on the right. There is no gear drive shifter so it has to be a hydro.
My red 149 has a few QL parts to help make it look like a 66 series.
I wasn't aware that the later WFs had the serial # tag on the frame. I thought that was something they changed during the QL production.
My red 149 has a few QL parts to help make it look like a 66 series.
I wasn't aware that the later WFs had the serial # tag on the frame. I thought that was something they changed during the QL production.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
http://www.youtube.com/user/farmallgray