My Cub Cadet 100 Build/Mod
-
- Posts: 87
- Joined: Thu Apr 07, 2011 9:40 pm
- First and Last Name: Tim Edington
- Location: Grandview,Tn
My Cub Cadet 100 Build/Mod
Here is a pic of my Cub Cadet 100 that I modified.
- Attachments
-
- P9260485small.jpg (267.54 KiB) Viewed 5100 times
-
- redih 011small.jpg (264.34 KiB) Viewed 5100 times
Cub Cadet 100
Cub Cadet 100
Cub Cadet 100
Cub Cadet 106
Cub Cadet 1450 (my dedicated mowing tractor)
Cub Cadet 128
Cub Cadet 100
Cub Cadet 100
Cub Cadet 106
Cub Cadet 1450 (my dedicated mowing tractor)
Cub Cadet 128
- Paul B
- Posts: 586
- Joined: Wed Sep 08, 2010 8:20 pm
- First and Last Name: Paul R. Bell
- Location: Louisville, KY, where all your IH built Cub Cadets were born
Re: My Cub Cadet 100 Build/Mod
I like it, I like it, I like it. There is just something about a 70/100. I normally don't care for the early models painted red, but this one is nice. Do I see a wide frame front axle with modified spindles? What size are the rear wheels/tires?
May you always have as many landings as you do takeoff's.........
- Jlaws
- Posts: 1141
- Joined: Sun Sep 05, 2010 10:14 pm
- First and Last Name: Jess Laws
- Location: Independence , Ky
Re: My Cub Cadet 100 Build/Mod
NICE !!!! I'm partial to 100's , and that looks great in the red Farmall paint scheme . You did an excellent job....
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: My Cub Cadet 100 Build/Mod
Is that the 4x4 model,That thing is up there ! Looks great.Dave
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
-
- Posts: 87
- Joined: Thu Apr 07, 2011 9:40 pm
- First and Last Name: Tim Edington
- Location: Grandview,Tn
Re: My Cub Cadet 100 Build/Mod
Thanks,gentlemen for the nice comments.
Mr.Paul,you are correct,I used a wide frame front axle and modified the spindles to give me the 2" lift I needed to compensate for the 27x7.5x12 rear tires on 12 x 7 rims (wheel horse style with more offset).The tires are Interco Interforce ATV tires .The tall tires do gear it up ,but not too much.Third gear is only for smooth surfaces!
Mr.Paul,you are correct,I used a wide frame front axle and modified the spindles to give me the 2" lift I needed to compensate for the 27x7.5x12 rear tires on 12 x 7 rims (wheel horse style with more offset).The tires are Interco Interforce ATV tires .The tall tires do gear it up ,but not too much.Third gear is only for smooth surfaces!
Cub Cadet 100
Cub Cadet 100
Cub Cadet 100
Cub Cadet 106
Cub Cadet 1450 (my dedicated mowing tractor)
Cub Cadet 128
Cub Cadet 100
Cub Cadet 100
Cub Cadet 106
Cub Cadet 1450 (my dedicated mowing tractor)
Cub Cadet 128
-
- Posts: 72
- Joined: Wed Jul 06, 2011 4:24 pm
- First and Last Name: David Grapes
- Location: Liberty Township, OH
Re: My Cub Cadet 100 Build/Mod
Nice Job! I like!
Thanks for sharing,
David
Thanks for sharing,
David