Page 1 of 1
782D Brinly 3 point rockshaft
Posted: Fri Aug 07, 2015 8:37 am
by albie
Re: 782D Brinly 3 point rockshaft
Posted: Fri Aug 07, 2015 11:35 am
by albie
Here's the rockshaft welded up. Now to make the arm off the bottom.
- image.jpg (1.53 MiB) Viewed 13107 times
Re: 782D Brinly 3 point rockshaft
Posted: Sun Aug 09, 2015 9:09 pm
by Tom Scott
Albie - Real nice work, I'll be watching!
Re: 782D Brinly 3 point rockshaft
Posted: Tue Aug 11, 2015 4:52 pm
by albie
Here are my parts installed for a test fit and locating where the arm goes for the lift rod to push on.
- image.jpg (1.45 MiB) Viewed 13071 times
- image.jpg (1.62 MiB) Viewed 13071 times
Re: 782D Brinly 3 point rockshaft
Posted: Tue Aug 11, 2015 7:32 pm
by dag1450
MAN.....nice job "cutting and pasting"
I personally would have made a wood mock up first.....then ..scratch my head when it came time to make it in metal.
Looks Great!
Re: 782D Brinly 3 point rockshaft
Posted: Tue Aug 11, 2015 8:02 pm
by albie
Thanks Dave, I guess I should show my cardboard template I started with. The cool part is it's all made from scraps from under one of the welders workbenches at my job. It also helps to have the equipment we have at work for metal fabrication.
Re: 782D Brinly 3 point rockshaft
Posted: Thu Aug 13, 2015 8:16 pm
by dag1450
YES....that machine...and the gold bit.... IMPRESSIVE ! With that bit... Is that something u need to take multiple passes on or just set and forget it?
It looks like a beast. U should start selling them. Im too cheap...but others might buy one. Dave
Re: 782D Brinly 3 point rockshaft
Posted: Fri Aug 14, 2015 4:40 pm
by albie
That is an old school Bridgeport style milling machine not quite set it and forget it. I did small cuts but could have done it all in one shot. My dad and Steve T said I should sell them but I like to keep it one off custom
Re: 782D Brinly 3 point rockshaft
Posted: Mon Sep 14, 2015 9:47 am
by albie
Here's a little more progress. Made the lift bar as a copy of a 782 gas just 4" longer and finished my rockshaft.
- image.jpg (1.44 MiB) Viewed 12991 times
- image.jpg (1.32 MiB) Viewed 12991 times
Re: 782D Brinly 3 point rockshaft
Posted: Thu Sep 24, 2015 12:58 pm
by albie
Today I extended the Brinly hoop to match the rockshaft/top link
- image.jpg (1.67 MiB) Viewed 12961 times
- image.jpg (1.81 MiB) Viewed 12961 times
Re: 782D Brinly 3 point rockshaft
Posted: Sat Dec 05, 2015 4:04 pm
by albie
Re: 782D Brinly 3 point rockshaft
Posted: Sat Dec 05, 2015 7:08 pm
by JMotuzick
That's some nice work! Very profesinal!
Re: 782D Brinly 3 point rockshaft
Posted: Mon Dec 07, 2015 12:32 am
by Tom Scott
Albie - Really nice work you did on that. Hopefully I will see it at Maryland Line next year!
Re: 782D Brinly 3 point rockshaft
Posted: Mon Dec 07, 2015 6:11 am
by dag1450
Looks nice!
So Albie.........that is CCC built 782 with an older set of fenders? Or did u add the cool IH decal? Just wondering.
Re: 782D Brinly 3 point rockshaft
Posted: Mon Dec 07, 2015 9:25 am
by JMotuzick
I belive that the hood and fender decals where always " IH" in the red 82 series wether it was made by IH or CCC.
Re: 782D Brinly 3 point rockshaft
Posted: Mon Dec 07, 2015 8:56 pm
by albie
Thanks everyone. The fenders were on it when I got it and it's all original as far as I know.
Re: 782D Brinly 3 point rockshaft
Posted: Mon Dec 07, 2015 10:13 pm
by dag1450
Yea Albie I think Joe cleared it up. It sounds right...but it don't make sense. I can only imagine the crazy times during the change over.
Re: 782D Brinly 3 point rockshaft
Posted: Thu Mar 24, 2016 4:13 pm
by albie
Ok here's a finished and ready for PA plowday
- image.jpeg (2.86 MiB) Viewed 12846 times
Re: 782D Brinly 3 point rockshaft
Posted: Thu Mar 24, 2016 10:11 pm
by Tom Scott
Albie - Great job!
Re: 782D Brinly 3 point rockshaft
Posted: Mon Apr 18, 2016 10:26 am
by albie
One final installment...I gave it a good workout at PA Plowday and it worked great!
Re: 782D Brinly 3 point rockshaft
Posted: Sun Apr 24, 2016 7:33 pm
by PTWannaHave
Nice work...!! So glad it worked/payed off at Plough Day for ya!