Will a hydro rear bolt up?
-
- Posts: 5
- Joined: Sat Nov 20, 2010 9:18 pm
- First and Last Name: Bill Siwak
- Location: Annapolis, MD
Will a hydro rear bolt up?
I have a CC 102 used as a stock puller that needs a new rear differential carrier. I can get a complete hydro rear differential locally if it will work. Anyone know if it will bolt up to the 102 manual transmission?
-
- Posts: 42
- Joined: Fri Sep 24, 2010 11:19 am
- First and Last Name: Frank A. Currier
- Location: Portage Lake, Maine
Re: Will a hydro rear bolt up?
I use PartsTree.com as a parts lookup reference (and ocassionally order from them to ease my conscience) and it looks to me like the gear and hydro drive rears are an exact match. I used your 102 and a 149 as models.
- Farmallgray
- Posts: 1021
- Joined: Mon Sep 06, 2010 7:39 am
- First and Last Name: Todd Markle
- Location: Spring Mills, Pa
Re: Will a hydro rear bolt up?
Bill,
The whole rearend won't work. You can take the carrier out of the hydro and put it in your gear drive.
If you are lucky, the hydro may be from a later tractor and have the heavier carrier like the one on the right in this photo;
The whole rearend won't work. You can take the carrier out of the hydro and put it in your gear drive.
If you are lucky, the hydro may be from a later tractor and have the heavier carrier like the one on the right in this photo;
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
http://www.youtube.com/user/farmallgray