1200 drive shaft ball bushing

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
Fwatson
Posts: 41
Joined: Thu Mar 24, 2011 9:48 pm
First and Last Name: Frank Watson
Location: Franklin, Va

1200 drive shaft ball bushing

Post by Fwatson »

The ball bushing on a 1200, which way is it installed in the drive plate. From the engine side or the transmisson side. :?:
My 1200 has been torn down for about 9 years. I am started to put it back together.
{:-{)
Fwatson
From Southeastern Va.
Image

dale campbell
Posts: 167
Joined: Sun Oct 10, 2010 9:04 am
First and Last Name: Dale Campbell
Location: Summerville, PA

Re: 1200 drive shaft ball bushing

Post by dale campbell »

if i remember correctly the drive plate has a little radius on the front side which makes it easier to install it from the radius side

Post Reply