I was making a few drive couplers and took a short video of a couple cuts of my 1942 Monarch CK 12 lathe. .250 removed each pass
a couple of 1/4" cuts on my lathe
Forum rules
This section is reserved for semi detailed posts describing how you made a custom tool, or a detailed procedure for repairing a certain assembly of a tractor. Pictures are pretty much required
Posts in this section now have to be approved before they become visible.
If your looking for help repairing something please post in the shooting the breeze or the forum that pertains to your question.
This section is reserved for semi detailed posts describing how you made a custom tool, or a detailed procedure for repairing a certain assembly of a tractor. Pictures are pretty much required
Posts in this section now have to be approved before they become visible.
If your looking for help repairing something please post in the shooting the breeze or the forum that pertains to your question.
- Jeff in Pa
- Posts: 665
- Joined: Sun Sep 12, 2010 8:06 am
- First and Last Name: Jeff Derstine
- Location: Zionsville,PA
a couple of 1/4" cuts on my lathe
125 & 125 with hydraulic lift
- Tom Scott
- Chief Moderator
- Posts: 1777
- Joined: Mon Sep 06, 2010 9:11 pm
- First and Last Name: Tom Scott
- Location: Bentley Springs, Maryland
Re: a couple of 1/4" cuts on my lathe
Jeff, very cool, love to see old machines still in use!
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
- Jlaws
- Posts: 1141
- Joined: Sun Sep 05, 2010 10:14 pm
- First and Last Name: Jess Laws
- Location: Independence , Ky
Re: a couple of 1/4" cuts on my lathe
Yeah , I'd like to see it to .
Where's the video ?
Where's the video ?
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: a couple of 1/4" cuts on my lathe
uh.......Jess....the pic is the video. If u move your courser on the pic it should light up w a red box. Man....i thought i was slow!
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
- Jlaws
- Posts: 1141
- Joined: Sun Sep 05, 2010 10:14 pm
- First and Last Name: Jess Laws
- Location: Independence , Ky
Re: a couple of 1/4" cuts on my lathe
What picture ? Thats strange , I don't see a picture in his post .
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: a couple of 1/4" cuts on my lathe
sorry ..i cant seem to load it.idk
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: a couple of 1/4" cuts on my lathe
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
- Jlaws
- Posts: 1141
- Joined: Sun Sep 05, 2010 10:14 pm
- First and Last Name: Jess Laws
- Location: Independence , Ky
Re: a couple of 1/4" cuts on my lathe
Thanks Dave ,
I still don't understand why I don't see the original link ?
Jeff , nice video .
I'm always fascinated with metal lathes and have had a couple of opportunities in the past to buy one , but never did .
I could kick myself now for not pulling the trigger , but its on my short list of things I plan on getting in the near future , along with a hydraulic bearing press and sand blast cabinet .
I still don't understand why I don't see the original link ?
Jeff , nice video .
I'm always fascinated with metal lathes and have had a couple of opportunities in the past to buy one , but never did .
I could kick myself now for not pulling the trigger , but its on my short list of things I plan on getting in the near future , along with a hydraulic bearing press and sand blast cabinet .
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .