Front PTO Gauge

Post your custom tools or how to information here (caption your photo's) and we'll move any that are good to archive, into the How To section of the manuals.
Forum rules
This section is reserved for semi detailed posts describing how you made a custom tool, or a detailed procedure for repairing a certain assembly of a tractor. Pictures are pretty much required
Posts in this section now have to be approved before they become visible.
If your looking for help repairing something please post in the shooting the breeze or the forum that pertains to your question.
Post Reply
wdeturck

Front PTO Gauge

Post by wdeturck »

Here is a PTO gauge(not sure which one). If print it out with a density of 100 Pixels it should be close enough to make a gauge from the cutout.
Print at density of 100 Pixels per inch
Print at density of 100 Pixels per inch
PTO tool.jpg (8.9 KiB) Viewed 3917 times

User avatar
chzuck
Posts: 362
Joined: Tue Sep 07, 2010 2:51 pm
First and Last Name: Charlie Zuck
Location: Elizabethtown, PA

Re: Front PTO Gauge

Post by chzuck »

Geezer,
The one you have pictured is not the one for my 147. I had misplaced mine and hoped yours was the right one, but it did not line up. After more looking and thinking "where would I have put that gauge", I found it. I will try and get a photo on with dimensions like you did.
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow

User avatar
SWilliams
Posts: 805
Joined: Mon Sep 06, 2010 7:14 pm
First and Last Name: Steve Williams
Location: Fort Plain NY (Upstate NY near Cooperstown)

Re: Front PTO Gauge

Post by SWilliams »

Is this the one?
PTO tool.jpg
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.


"In God we trust, All others pay CASH..."

User avatar
chzuck
Posts: 362
Joined: Tue Sep 07, 2010 2:51 pm
First and Last Name: Charlie Zuck
Location: Elizabethtown, PA

Re: Front PTO Gauge

Post by chzuck »

This is the one that came with my front PTO Clutch Kit for a 147.


Front PTO Clutch Gauge
Front PTO Clutch Gauge
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow

Post Reply