Reduction Drive Shaft Oil Seal

Please stop in here and check out the rules on the stickies and introduce yourself.
Post Reply
oldiron105
Posts: 6
Joined: Tue Jun 09, 2015 4:41 pm
First and Last Name: Stacy Leis
Location: Elroy, WI

Reduction Drive Shaft Oil Seal

Post by oldiron105 »

Hi everyone could someone tell me how to get the Reduction Drive Shaft Oil Seal out without destroying anything ?thank you Stacy
Attachments
20150830_100912.jpg
20150830_100912.jpg (167.18 KiB) Viewed 1981 times

User avatar
Jlaws
Posts: 1141
Joined: Sun Sep 05, 2010 10:14 pm
First and Last Name: Jess Laws
Location: Independence , Ky

Re: Reduction Drive Shaft Oil Seal

Post by Jlaws »

Stacy , My usual method involves taking a sharp awl and punching two small holes on each side of the seal . Or you can also use a small drill bit and drill the holes . .
Then I take two sheet metal screws and thread them into the holes . I have two old screwdriver I use for pry bars that I put under the screw heads and pry on both sides , sometimes you have to alternate the pressure to walk them out . Most of the time they usually pop right out .
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .

oldiron105
Posts: 6
Joined: Tue Jun 09, 2015 4:41 pm
First and Last Name: Stacy Leis
Location: Elroy, WI

Re: Reduction Drive Shaft Oil Seal

Post by oldiron105 »

thank you we got it out :D

Post Reply