Cub Cadet Collectors dot com

Hi everyone could someone tell me how to get the Reduction Drive Shaft Oil Seal out without destroying anything ?thank you Stacy

Stacy , My usual method involves taking a sharp awl and punching two small holes on each side of the seal . Or you can also use a small drill bit and drill the holes . .
Then I take two sheet metal screws and thread them into the holes . I have two old screwdriver I use for pry bars that I put under the screw heads and pry on both sides , sometimes you have to alternate the pressure to walk them out . Most of the time they usually pop right out .

thank you we got it out