129 w/ QA-42a on gravel
-
- Posts: 4
- Joined: Wed Apr 16, 2014 8:24 pm
- First and Last Name: Scott Miller
- Location: Grantsville, MD
129 w/ QA-42a on gravel
Hello. I have a 129 with a QA-42A snowthrower. I am trying to use it on a 1500' gravel driveway. The skids on the snowthrower dig in to the gravel and with only a manual lift, I feel keeping it elevated using the lock will cause problems. Thinking about adding wheels to the QA-42. Any suggestions would be appreciated.
- BigMike
- Posts: 1357
- Joined: Mon Sep 06, 2010 8:45 pm
- First and Last Name: Mike Andrews
- Location: Niles,Michigan
Re: 129 w/ QA-42a on gravel
I made some special mounts and put pneumatic hand truck tires from Harbor Freight on one I restored 10 or 15 yrs ago. It worked very well but I needed to add some wings to cover the new width.
The only other thing I could think of were massive shoes to give enough area.
The only other thing I could think of were massive shoes to give enough area.
- dag1450
- Posts: 2365
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: 129 w/ QA-42a on gravel
I did smaller push mower type wheels for a few years. They worked good but ...I just ran a bolt through the side....If I were to do it again I would mount the bolt to the original skid shoes...This would b stronger.
I took the wheels off and now have these babies. With both setups...I try to keep it up about 1.5 inches. This seems to b enough for my stones. Give us some pics of your setup once you have it finished
I took the wheels off and now have these babies. With both setups...I try to keep it up about 1.5 inches. This seems to b enough for my stones. Give us some pics of your setup once you have it finished
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
-
- Posts: 4
- Joined: Wed Apr 16, 2014 8:24 pm
- First and Last Name: Scott Miller
- Location: Grantsville, MD
Re: 129 w/ QA-42a on gravel
Wow. They look good. I put switchbacks in my driveway and the standard skids just dig in. I seen where HD has 12" long ones but they are still only 1" wide. Did you make them?
- dag1450
- Posts: 2365
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: 129 w/ QA-42a on gravel
Scott....I picked these up at a Cub salvage yard...They were about to b scraped. Looks like a piece of 2.5 " flat welded to the original skid shoes. Not sure if I got a chance to used them last year or not.....But they do look cool.
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.