I just got my starter generater rebuilt, when i was running the tractor the tractor stared making a strange noise and the s/g cracked and a wax like liguid is leaking from the s/g or the engine near the s/g. Also the post got very hot and the insulation was red. Any thoghts or ideas arer welcome.
Thanks, James Pence
starter Generater Question
- jpence
- Posts: 45
- Joined: Tue Sep 07, 2010 4:08 pm
- First and Last Name: James Pence
- Location: Dysart, PA
starter Generater Question
James Pence in PA
- Farmallgray
- Posts: 1021
- Joined: Mon Sep 06, 2010 7:39 am
- First and Last Name: Todd Markle
- Location: Spring Mills, Pa
Re: starter Generater Question
Could be a problem with the regulator. The S/G on my 102 would get hot and I found one of the contacts was stuck in the regulator. Luckily I caught it before any damage was done to the S/G.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
http://www.youtube.com/user/farmallgray
- jpence
- Posts: 45
- Joined: Tue Sep 07, 2010 4:08 pm
- First and Last Name: James Pence
- Location: Dysart, PA
Re: starter Generater Question
the points may be stuck in the voltage regulator. i think there is a problem with the bearing in the s/g, also the post were not red hot it was just red paint(must have been from rebuild).
James Pence in PA