Hi guy's hope all are doing well. Can some one point me to where the hydro repair information is located on the new site or post the repair procedure that involves adding the piece of key way by the spring to keep them from creeping. Thanks in advance.
Jim D
Hydro repair on a 129
-
Scott C.
- Moderator
- Posts: 999
- Joined: Sun Sep 05, 2010 8:11 pm
- First and Last Name: Scott Cross
- Location: Greensburg, PA
Re: Hydro repair on a 129
Jim,
I had posted some pictures of the repair I did on the 149 (towards the bottom of the post).
viewtopic.php?f=4&t=1741
I had posted some pictures of the repair I did on the 149 (towards the bottom of the post).
viewtopic.php?f=4&t=1741
We don't stop playing because we grow old....
We grow old because we stop playing.
We grow old because we stop playing.
-
Trebor
- Posts: 88
- Joined: Mon Sep 06, 2010 7:55 am
- First and Last Name: Robert Ganyard
- Location: Marietta, GA 30068
Re: Hydro repair on a 129
Hi Jim,
Chase this link for a very good write up with pictures.
http://cubfaq.com/trunionrepair.html
Chase this link for a very good write up with pictures.
http://cubfaq.com/trunionrepair.html
“May you have the hindsight to know where you've been, The foresight to know where you are going, And the insight to know when you have gone too far”.