QA42A Rebuild

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
John Norcross
Posts: 13
Joined: Sat Sep 25, 2010 4:45 am
First and Last Name: John Norcross
Location: New Milford,CT

QA42A Rebuild

Post by John Norcross »

I'm going through my QA42A snowthrower and was looking for a part number for the bearings on the main auger.
If anyone has the # or another source for these that would be of help.

Thanks

John.
Top
EngineMike
Moderator
Posts: 42
Joined: Wed Sep 08, 2010 1:47 pm
First and Last Name: Michael Miner
Location: Ludlow, Mass

Re: QA42A Rebuild

Post by EngineMike »

John,

From what I can tell from the break down the part number is #475-698-R91. I would think any good bearing supply house would have them on the shelf. There's a guy on epay that has them listed for sale as well.

Michael
Top
John Norcross
Posts: 13
Joined: Sat Sep 25, 2010 4:45 am
First and Last Name: John Norcross
Location: New Milford,CT

Re: QA42A Rebuild

Post by John Norcross »

Thanks Mike.
Where can I find that parts break down?
I was looking through all the stuff I have and couldn't find one for snowthrowers.

John.
Top
Klapatta
Posts: 1364
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: QA42A Rebuild

Post by Klapatta »

Here you go John ;)
FSCN0160.JPG
Top
Post Reply

Return to “Cub Cadets and Shooting the Breeze”