Haban sickle mower parts
-
- Posts: 88
- Joined: Fri Jun 24, 2011 10:31 pm
- First and Last Name: Jack Hammer
- Location: Kingston NY
Haban sickle mower parts
Where does one buy Haban sickle mower parts
Cub Cadet 104
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
-
- Moderator
- Posts: 1175
- Joined: Tue Sep 07, 2010 6:22 pm
- First and Last Name: Joe Motuzick
- Location: Torrington Ct
Re: Haban sickle mower parts
What do you need? Many parts need to be found used teeth can be had at TSC belts and pulleis too. You may need to custom make some parts if you cant find them.
-
- Posts: 88
- Joined: Fri Jun 24, 2011 10:31 pm
- First and Last Name: Jack Hammer
- Location: Kingston NY
Re: Haban sickle mower parts
Just getting started on the old worn Haban , so far I need the large pulley and the teeth.JMotuzick wrote:What do you need? Many parts need to be found used teeth can be had at TSC belts and pulleis too. You may need to custom make some parts if you cant find them.
I will Check my local TSC for the teeth, Thanks
Cub Cadet 104
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
-
- Posts: 88
- Joined: Fri Jun 24, 2011 10:31 pm
- First and Last Name: Jack Hammer
- Location: Kingston NY
Re: Haban sickle mower parts
There is an adjustable bar with two locking bolts it goes from the main frame to the sickle gear box, anyone know thw proper name for that part and where I might buy one?
Cub Cadet 104
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
- ksanders
- Posts: 932
- Joined: Mon Sep 06, 2010 2:56 pm
- First and Last Name: Kevin Sanders
- Location: Sellersburg, Indiana
Re: Haban sickle mower parts
Grizzly Industries usually has any pulley I've ever been able to need. That arm you're referring too will probably have to be made. What's wrong with yours?
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!
-
- Posts: 88
- Joined: Fri Jun 24, 2011 10:31 pm
- First and Last Name: Jack Hammer
- Location: Kingston NY
Re: Haban sickle mower parts
The arm is slightly bent and badly rusted , not much chance of getting the threads workable, its getting a shot morning and night of PB Blaster
Cub Cadet 104
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
- ksanders
- Posts: 932
- Joined: Mon Sep 06, 2010 2:56 pm
- First and Last Name: Kevin Sanders
- Location: Sellersburg, Indiana
Re: Haban sickle mower parts
I have actually adjusted that part some in the past so I'd just take it off and do it right. If you don't have a tap and die set invest in a cheapy set quick. Drill and tap both adjusting holes so you can easily adjust it again. Keep the tube part with the adjuster bolts but make a new rod that goes inside of it. At the end where it bolts to the front, either tap and thread something on it to mount to the sickle mower or weld it. That bend might be harder to make in the rod than welding something. That's my first thoughts without seeing it. I was able to salvage the rod but those adjuster "bolts" were froze tight and had to be tapped out. Do you have any pics of this thing btw?
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!
-
- Posts: 88
- Joined: Fri Jun 24, 2011 10:31 pm
- First and Last Name: Jack Hammer
- Location: Kingston NY
Re: Haban sickle mower parts
Its going to take time and PB Blaster and the blue wrench to get this rod working, I have had succsess with the pulley bolts and the pulley is slowly coming off
Pics I am working on it, my kids always post pics I am not up on pics yet ....
Pics I am working on it, my kids always post pics I am not up on pics yet ....
Cub Cadet 104
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
- Jeff in Pa
- Posts: 665
- Joined: Sun Sep 12, 2010 8:06 am
- First and Last Name: Jeff Derstine
- Location: Zionsville,PA
Re: Haban sickle mower parts
PB Blaster? As a triple guy you should know KROIL and a 50/50 mix of atf and acetone work better on stuck stuff.Jackman wrote:Its going to take time and PB Blaster and the blue wrench to get this rod working, I have had succsess with the pulley bolts and the pulley is slowly coming off
Pics I am working on it, my kids always post pics I am not up on pics yet ....
Let me know if you need parts fabbed up.
125 & 125 with hydraulic lift
-
- Posts: 88
- Joined: Fri Jun 24, 2011 10:31 pm
- First and Last Name: Jack Hammer
- Location: Kingston NY
Re: Haban sickle mower parts
Kroil is unheard of around here , I know its good stuff lots of web info but the PB Blaster works well and is in the local stores on the shelf
I don't know if I need any fabrication yet but I do want a Brinley plow and lift, I making a Fall trip down to Wind Gap Pa. if you have some stuff for sale maybe I could swing by
I don't know if I need any fabrication yet but I do want a Brinley plow and lift, I making a Fall trip down to Wind Gap Pa. if you have some stuff for sale maybe I could swing by
Cub Cadet 104
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
-
- Posts: 88
- Joined: Fri Jun 24, 2011 10:31 pm
- First and Last Name: Jack Hammer
- Location: Kingston NY
Re: Haban sickle mower parts
Distaster has struck , while removing old rusty stuck pulley the main shaft end about 1 inch in length snapped off there is most likely enough shaft left to weld a new pulley on but I am so PO'ed for busting the shaft
Cub Cadet 104
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
- Jeff in Pa
- Posts: 665
- Joined: Sun Sep 12, 2010 8:06 am
- First and Last Name: Jeff Derstine
- Location: Zionsville,PA
Re: Haban sickle mower parts
It's not the end of the world. What size is that shaft?Jackman wrote:Distaster has struck , while removing old rusty stuck pulley the main shaft end about 1 inch in length snapped off there is most likely enough shaft left to weld a new pulley on but I am so PO'ed for busting the shaft
If you want a sleeve hitch adapter, you have to order one. I make them for each person that orders them.
125 & 125 with hydraulic lift
-
- Posts: 88
- Joined: Fri Jun 24, 2011 10:31 pm
- First and Last Name: Jack Hammer
- Location: Kingston NY
Re: Haban sickle mower parts
The shaft is about 1/2 inch , I have not actually measured it yet and your right It's not the end of the world once the new pulley is welded in place it will work just fine.
I'll be looking for a lift next year right now its all about making this Haban sickle bar operable.
I'll be looking for a lift next year right now its all about making this Haban sickle bar operable.
Cub Cadet 104
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
-
- Posts: 139
- Joined: Thu Sep 09, 2010 7:04 am
- First and Last Name: Ben Morong
- Location: Southern ME
Re: Haban sickle mower parts
For those who can't buy Kroil locally, you can buy direct from the company (just Google Kroil or Kano Laboratories) -- it's good stuff, they have internet specials, and once you buy some from them, every few months they'll send you a newsletter and special offers. I got two spray cans in a special offer, and gave one away to someone who could use it.
Cub Cadet Originals -- Ayuh! (and a couple of 124's, 125's, and a 1650 -- Yep!)