Moog part # for Quietline engine mounts
-
- Posts: 21
- Joined: Mon Sep 06, 2010 5:40 pm
- First and Last Name: Bud Horn
- Location: Salladasburg, PA 17740
Moog part # for Quietline engine mounts
Hi all,
I need the part # for the moog kit for the quietline engine mount upgrade.
Thanks
I need the part # for the moog kit for the quietline engine mount upgrade.
Thanks
-
- Posts: 21
- Joined: Mon Sep 06, 2010 5:40 pm
- First and Last Name: Bud Horn
- Location: Salladasburg, PA 17740
Re: Moog part # for Quietline engine mounts
Thanks AJ,
I knew it was something like that. This time I am going to save it
to my files for CCs.
I knew it was something like that. This time I am going to save it
to my files for CCs.
-
- Posts: 105
- Joined: Tue Sep 07, 2010 7:09 pm
- First and Last Name: AJ Gross
- Location: Milan Indiana
Re: Moog part # for Quietline engine mounts
Bub while you are at it, save all of this. Someone on the registry posted this a couple of years ago and I've just added to it.
AJ
Tie rod end CCC # 723-3018 NAPA # 7-04231
3/4" wheel brg IH # 394883R93, NAPA # 7-04292
1" wheel brg CCC # 741-3002, NAPA # 7-08412
Electronic Voltage Regulator plug NAPA # 7-016008
5 prong ign switch plug NAPA # 7-016034
Breaker points Kohler # 47-150-03, NAPA # 7-01029
Condenser IH # 62188C1, Kohler # 230722-S, NAPA # 7-01338
Muffler, models 102-149 IH # 393840R91, NAPA # 7-03680
Hydro filter CCC # 723-3014, NAPA # 1084
Hydro filter for auto gear pump CCC # 723-3014, NAPA # 1410
Rear wheel seal CCC # 721-0187, NAPA # 9878
Hydro input seal IH # 394847R91, Sundstrand # 9008000-6201 NAPA # 6204
Hydro trunion seal SN 592014 & below IH # 383534R91 NAPA # 6720
Hydro trunion sealSN 592015 & above Sundstrand # 9008000-6701 NAPA # 6763
PTO bearing, models 70-169 IH # 60071C91 NAPA # RA100RR
Engine oil filter Kohler 52-050-02-S, NAPA # 1348
Engine oil filter Kohler 12-050-01-S, NAPA # 1056
Engine Coil Kohler NAPA # 4151921S
Moog iso mounts Moog K5252
Mag Relay AR201
AJ
Tie rod end CCC # 723-3018 NAPA # 7-04231
3/4" wheel brg IH # 394883R93, NAPA # 7-04292
1" wheel brg CCC # 741-3002, NAPA # 7-08412
Electronic Voltage Regulator plug NAPA # 7-016008
5 prong ign switch plug NAPA # 7-016034
Breaker points Kohler # 47-150-03, NAPA # 7-01029
Condenser IH # 62188C1, Kohler # 230722-S, NAPA # 7-01338
Muffler, models 102-149 IH # 393840R91, NAPA # 7-03680
Hydro filter CCC # 723-3014, NAPA # 1084
Hydro filter for auto gear pump CCC # 723-3014, NAPA # 1410
Rear wheel seal CCC # 721-0187, NAPA # 9878
Hydro input seal IH # 394847R91, Sundstrand # 9008000-6201 NAPA # 6204
Hydro trunion seal SN 592014 & below IH # 383534R91 NAPA # 6720
Hydro trunion sealSN 592015 & above Sundstrand # 9008000-6701 NAPA # 6763
PTO bearing, models 70-169 IH # 60071C91 NAPA # RA100RR
Engine oil filter Kohler 52-050-02-S, NAPA # 1348
Engine oil filter Kohler 12-050-01-S, NAPA # 1056
Engine Coil Kohler NAPA # 4151921S
Moog iso mounts Moog K5252
Mag Relay AR201
-
- Posts: 461
- Joined: Mon Sep 06, 2010 6:58 pm
- First and Last Name: Ray Weaver
- Location: Stevens, PA
Re: Moog part # for Quietline engine mounts
I like the interchage on every thing but the hydro filter as my customers are haveing problems with off brand filters making the hydro not work just for guys to be aware
-
- Posts: 3
- Joined: Mon Sep 06, 2010 5:04 pm
- First and Last Name: Dan MacCuller
- Location: Atlanta, ga
Re: Moog part # for Quietline engine mounts
I'm pretty sure Todd M. started that list about a year ago. He may have added to it since.
-
- Posts: 85
- Joined: Tue Sep 07, 2010 6:01 pm
- First and Last Name: Grant Braddish
- Location: southern, VT
Re: Moog part # for Quietline engine mounts
Can someone confirm if the NAPA tie rod end will work for my QL? The CCC part number has me confused.
Thanks.
Thanks.
-
- Posts: 1352
- Joined: Mon Sep 06, 2010 2:25 pm
- First and Last Name: Kenneth LaPatta
- Location: Rockingham VT.
Re: Moog part # for Quietline engine mounts
Good to see you posting Grant
I had some concerns about your condition after Irene came to town.
At least the apple crop should be juicy this year
You might consider going with this-
I had some concerns about your condition after Irene came to town.
At least the apple crop should be juicy this year
You might consider going with this-
- Scott C.
- Moderator
- Posts: 999
- Joined: Sun Sep 05, 2010 8:11 pm
- First and Last Name: Scott Cross
- Location: Greensburg, PA
Re: Moog part # for Quietline engine mounts
I just added that to the Documents section
downloads.php?view=detail&df_id=320
If folks add to it, I'll change it as we go.
downloads.php?view=detail&df_id=320
If folks add to it, I'll change it as we go.
We don't stop playing because we grow old....
We grow old because we stop playing.
We grow old because we stop playing.
-
- Posts: 85
- Joined: Tue Sep 07, 2010 6:01 pm
- First and Last Name: Grant Braddish
- Location: southern, VT
Re: Moog part # for Quietline engine mounts
We made out alright, Ken. It's better to be up high at the headwaters during an event like that. Driving down your way revealed a lot more damage. I know you are up on a hill and I hope your roads made it through okay.
Called my local NAPA dealer and they ordered the tie rod ends. Thanks.
Called my local NAPA dealer and they ordered the tie rod ends. Thanks.