Ive been asked to put a 16 aqs eng, from a 1650, in a 149 frame. Besides the wiring, what else do I need to change.
thanks in advance
OK all you QL lovers
- vince_o
- Moderator
- Posts: 2045
- Joined: Mon Sep 06, 2010 3:20 am
- First and Last Name: Vince Ochiuto
- Location: Pickens, SC
OK all you QL lovers
"It's a damn poor mind that can only think of one way to spell a word."
-Andrew Jackson
-Andrew Jackson
-
- Posts: 19
- Joined: Mon Jan 21, 2013 12:25 pm
- First and Last Name: Doug Lester
- Location: Greenville, OH.
Re: OK all you QL lovers
your drawers. because you'll crap when you see how cool that'll be.......
Doug
- vince_o
- Moderator
- Posts: 2045
- Joined: Mon Sep 06, 2010 3:20 am
- First and Last Name: Vince Ochiuto
- Location: Pickens, SC
Re: OK all you QL lovers
I have some CI oil pans, figured Id change that out, harness, drive line should be the same. Should be pleanty of room as they are the same frame.
"It's a damn poor mind that can only think of one way to spell a word."
-Andrew Jackson
-Andrew Jackson
- ksanders
- Posts: 932
- Joined: Mon Sep 06, 2010 2:56 pm
- First and Last Name: Kevin Sanders
- Location: Sellersburg, Indiana
Re: OK all you QL lovers
You'll need to change sheet metal, at least the flywheel hosuing so the coil and everything is in the right place. Flywheel and backing plate on the motor need changed unless you try to stick with the ring gear starter and charging system. Also have to decide if you're going to the original manual pto or stay with the electric. I don't think manual linkage will run past a ring gear starter. I remember trying that once. Also the dipstick will be different but fit. That may or may not run into your linkage for a manual pto. You can always get a dipstick cover and mount a cam mounted one.
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!
- vince_o
- Moderator
- Posts: 2045
- Joined: Mon Sep 06, 2010 3:20 am
- First and Last Name: Vince Ochiuto
- Location: Pickens, SC
Re: OK all you QL lovers
Thanks Kevin
"It's a damn poor mind that can only think of one way to spell a word."
-Andrew Jackson
-Andrew Jackson
-
- Posts: 21
- Joined: Mon Sep 06, 2010 5:40 pm
- First and Last Name: Bud Horn
- Location: Salladasburg, PA 17740
Re: OK all you QL lovers
Vince,
Ive done this lots in 108,128's.Same tractor, just gear drive. Quite a simple swap. If you use the wire harness from the QL
everything hooks right up and works.
Ive done this lots in 108,128's.Same tractor, just gear drive. Quite a simple swap. If you use the wire harness from the QL
everything hooks right up and works.