Is the mule drive for a 682 any different than one for an 1811?
I installed a 44" mower deck that was installed on a 1811 onto my 682 and it doesn't sit flat front to back.
Mule Drive Question
-
ReicheP
- CCC's Official Weatherman
- Posts: 983
- Joined: Wed Sep 08, 2010 7:58 pm
- First and Last Name: Paul Reiche
- Location: Some where over the rainbow, PA
Mule Drive Question
DUI Offenders murder the equivalent of two 747 crashes in the USA each week!
682 W/44" Deck, 1650 W/Snow Blade, 1811 W/450, 1650 Barn Find
682 W/44" Deck, 1650 W/Snow Blade, 1811 W/450, 1650 Barn Find
-
l palma
- Posts: 738
- Joined: Mon Sep 06, 2010 9:46 am
- First and Last Name: Lew Palma
- Location: Montague, N.J.
Re: Mule Drive Question
Got any pictures of your configuration?
Did you use the one that was on the 682?
Did you use the one that was on the 682?
-
ReicheP
- CCC's Official Weatherman
- Posts: 983
- Joined: Wed Sep 08, 2010 7:58 pm
- First and Last Name: Paul Reiche
- Location: Some where over the rainbow, PA
Re: Mule Drive Question
i used the 682 mule drive. no photos thi8s evening.
DUI Offenders murder the equivalent of two 747 crashes in the USA each week!
682 W/44" Deck, 1650 W/Snow Blade, 1811 W/450, 1650 Barn Find
682 W/44" Deck, 1650 W/Snow Blade, 1811 W/450, 1650 Barn Find
-
Mcamp
- Posts: 87
- Joined: Sun Sep 12, 2010 9:25 pm
- First and Last Name: Mark Campbell
- Location: Brookville, Pa
Re: Mule Drive Question
if you mount a mower from one tractor onto another even using the same mounting frame you may still have to adjust the hangers and front lift eyes to level the deck because of wear on the tractor lift arms and different tire height.