need dimensions on a 582 throwout arm

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
User avatar
Farmallgray
Posts: 1021
Joined: Mon Sep 06, 2010 7:39 am
First and Last Name: Todd Markle
Location: Spring Mills, Pa

need dimensions on a 582 throwout arm

Post by Farmallgray »

I need some dimensions on the clutch throwout arm on a 582 or 1050, 1606, 1806, etc (82 series style gear drive).
They don't have to be super precise. I need the overall length, and the distance from the top pivot hole to the center of the hole the driveshaft goes through.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray

User avatar
Farmallgray
Posts: 1021
Joined: Mon Sep 06, 2010 7:39 am
First and Last Name: Todd Markle
Location: Spring Mills, Pa

Re: need dimensions on a 582 throwout arm

Post by Farmallgray »

Any help? Somebody?
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray

bud horn
Posts: 21
Joined: Mon Sep 06, 2010 5:40 pm
First and Last Name: Bud Horn
Location: Salladasburg, PA 17740

Re: need dimensions on a 582 throwout arm

Post by bud horn »

Todd,
Don't know if you got these yet.
From center of top mounting hole to center of driveshaft is 2-3/4"
The total lenght is 9-3/4"
The top hole is 3/8" to center down from top.
The bottom hole for clutch rod is 13/16" up from bottom.
Need anthing else let me know.

User avatar
Farmallgray
Posts: 1021
Joined: Mon Sep 06, 2010 7:39 am
First and Last Name: Todd Markle
Location: Spring Mills, Pa

Re: need dimensions on a 582 throwout arm

Post by Farmallgray »

Thanks, Bud
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray

Post Reply