Cub Cadet Collectors dot com

I need some dimensions on the clutch throwout arm on a 582 or 1050, 1606, 1806, etc (82 series style gear drive).
They don't have to be super precise. I need the overall length, and the distance from the top pivot hole to the center of the hole the driveshaft goes through.

Any help? Somebody?

Todd,
Don't know if you got these yet.
From center of top mounting hole to center of driveshaft is 2-3/4"
The total lenght is 9-3/4"
The top hole is 3/8" to center down from top.
The bottom hole for clutch rod is 13/16" up from bottom.
Need anthing else let me know.

Thanks, Bud