Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
My 149 has a habit of breaking the spiral pin on the driveshaft.
I fixed the engine hub groove, helped a little but I get a month or two of use and it shears again.
This time I had to get towed back to the house by a Toro!
Never again.
IMG_2373.JPG (176.19 KiB) Viewed 3581 times
I took a spare hub and welded on a bar to bolt a rag joint to.
I used a blade balancer to even the weight out.
IMG_2372.JPG (100.86 KiB) Viewed 3581 times
Cut and drilled the shaft to accept a rag joint mount for a hydro input shaft.
IMG_2376.JPG (210.66 KiB) Viewed 3581 times
Got it on the 149 and did some plowing yesterday. It works great!
IMG_2377.JPG (99 KiB) Viewed 3581 times
We don't stop playing because we grow old....
We grow old because we stop playing.