59M Shredder-Grinder
-
- Posts: 190
- Joined: Wed Sep 08, 2010 9:20 am
- First and Last Name: Paul E. Funk
- Location: Boonville, Indiana
59M Shredder-Grinder
Looking for some help. I just purchased a 59M Chipper-Grinder. It all looks to be in really good shape, but part of the mount is missing. I've got a 2 X 4 replacing it in the pictures. It's parts numbers 6 and 18 in the parts diagram. I've never owned a Chipper-Grinder so all I know about the mount is what I see in the parts lookup. The parts are NLA, but I think part No. 6 would be easy to make if someone can supply me with some dimensions. I'm guessing the springs set on top of the two sections of pipe and don't go down inside them, but I'm not sure. Also I don't know the compressed or uncompressed length of the springs. Any help would really be appreciated. This thing is going to be great when I get it going!!!
- Jlaws
- Posts: 1141
- Joined: Sun Sep 05, 2010 10:14 pm
- First and Last Name: Jess Laws
- Location: Independence , Ky
Re: 59M Shredder-Grinder
Paul , must be a week for finding shredders . I picked this up today and its missing the same piece your missing , plus the belt guard .
When you get time I'd like some measurement of your belt guard so I can fab one .
If you get some measurement of that missing part #6 let me know , I'm going to make one for myself also .
When you get time I'd like some measurement of your belt guard so I can fab one .
If you get some measurement of that missing part #6 let me know , I'm going to make one for myself also .
- Attachments
-
- Shredder-Grinder 001.JPG (787.92 KiB) Viewed 6137 times
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .
-
- Posts: 190
- Joined: Wed Sep 08, 2010 9:20 am
- First and Last Name: Paul E. Funk
- Location: Boonville, Indiana
Re: 59M Shredder-Grinder
Jess, if you'll send me an email, I think I have managed to collect all the information you need including the shield dimensions. Various forum members have been very helpful. My email address is in my profile.
- Jlaws
- Posts: 1141
- Joined: Sun Sep 05, 2010 10:14 pm
- First and Last Name: Jess Laws
- Location: Independence , Ky
Re: 59M Shredder-Grinder
Paul email sent ...I think .
I've been having a lot of issues lately with my email account .
I've been having a lot of issues lately with my email account .
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .
-
- Posts: 190
- Joined: Wed Sep 08, 2010 9:20 am
- First and Last Name: Paul E. Funk
- Location: Boonville, Indiana
Re: 59M Shredder-Grinder
Jess, I got your email and replied with the information I have. If you don't get anything, let me know.
- Jlaws
- Posts: 1141
- Joined: Sun Sep 05, 2010 10:14 pm
- First and Last Name: Jess Laws
- Location: Independence , Ky
Re: 59M Shredder-Grinder
Paul , You da man !!!
Thanks for going the extra mile getting those pictures and info to me in a format that I could get to open , its exactly what I needed .
I've got all the material and I was looking for an excuse to get my welder out .
Thanks for going the extra mile getting those pictures and info to me in a format that I could get to open , its exactly what I needed .
I've got all the material and I was looking for an excuse to get my welder out .
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .
- cjrolke
- Posts: 91
- Joined: Sun Apr 03, 2011 8:37 pm
- First and Last Name: Chris Rolke
- Location: Loveland, OH
Re: 59M Shredder-Grinder
hey I know this is an older thread but can I get a copy of the info?
I am getting a 59 p and want to convert it to a 59m
thanks
I am getting a 59 p and want to convert it to a 59m
thanks
-
- Posts: 190
- Joined: Wed Sep 08, 2010 9:20 am
- First and Last Name: Paul E. Funk
- Location: Boonville, Indiana
Re: 59M Shredder-Grinder
Chris, I don't recall what I put in the original thread and it doesn't show up for me in your post. But, you can find a copy of the manual here
http://ccmanuals.info/pdf/59M%20Shredde ... Manual.pdf
and, I have several pictures posted here
http://www.cubcadetman.com/cc/attachmen ... ictures-4/
I can try to get measurements or more pictures if you need them. There's some great pictures of the mounting system in the manual.
Paul
http://ccmanuals.info/pdf/59M%20Shredde ... Manual.pdf
and, I have several pictures posted here
http://www.cubcadetman.com/cc/attachmen ... ictures-4/
I can try to get measurements or more pictures if you need them. There's some great pictures of the mounting system in the manual.
Paul
- Dave C
- Web Developer
- Posts: 1014
- Joined: Mon Sep 06, 2010 7:12 am
- First and Last Name: David Chester
- Location: Wallingford, CT
Re: 59M Shredder-Grinder
Trying to save cubs... one at a time.......
- cjrolke
- Posts: 91
- Joined: Sun Apr 03, 2011 8:37 pm
- First and Last Name: Chris Rolke
- Location: Loveland, OH
Re: 59M Shredder-Grinder
thanks I have to get the unit home so I can start figuring out what I need to doPaulf wrote:Chris, I don't recall what I put in the original thread and it doesn't show up for me in your post. But, you can find a copy of the manual here
http://ccmanuals.info/pdf/59M%20Shredde ... Manual.pdf
and, I have several pictures posted here
http://www.cubcadetman.com/cc/attachmen ... ictures-4/
I can try to get measurements or more pictures if you need them. There's some great pictures of the mounting system in the manual.
Paul
- mmzullo
- Posts: 365
- Joined: Mon Sep 06, 2010 5:18 pm
- First and Last Name: Mike Marzullo
- Location: Kinnelon,NJ
Re: 59M Shredder-Grinder
Chris,
I have a coverted 59m from a mackissic chipper shreader. I got lucky 1 year at a swap meet and found all the mounting pieces for a 59m but the 2 ears that mount to the tractor. I made that out of tracing from a mule drive set up. Worked out great. I dont use it anymore but I still have it. I did have to move the drive pulley to other side . That piece that you have missing I made from 2 threaded rods with 2 lock nuts. I think I have pictures.
I have a coverted 59m from a mackissic chipper shreader. I got lucky 1 year at a swap meet and found all the mounting pieces for a 59m but the 2 ears that mount to the tractor. I made that out of tracing from a mule drive set up. Worked out great. I dont use it anymore but I still have it. I did have to move the drive pulley to other side . That piece that you have missing I made from 2 threaded rods with 2 lock nuts. I think I have pictures.
- mmzullo
- Posts: 365
- Joined: Mon Sep 06, 2010 5:18 pm
- First and Last Name: Mike Marzullo
- Location: Kinnelon,NJ
Re: 59M Shredder-Grinder
Here are some pictures. Now I remember I had to switch the hammers shaft because it was too short on the other side. I just fliped it in the drum. Rotating the hammers don't matter what direction they spin. I got a cast iron pulley because the stamped steel 1 bent. If you have any questions just ask. The last pieces are the ones I made easy fab.
- Attachments
-
- DSCN0051.JPG (91.02 KiB) Viewed 5978 times
-
- DSCN0023.JPG (92.78 KiB) Viewed 5978 times
-
- DSCN0052.JPG (90.24 KiB) Viewed 5978 times
-
- DSCN0047.JPG (98.35 KiB) Viewed 5978 times
-
- 59m1.jpg12.jpg1.jpg1.jpg (55.65 KiB) Viewed 5978 times