Can someone give me the dim for the hole in the frame for the grote light wire. And what size hole it needs to be I know that there is a grommet that goes in the hole.
Thanks in advance.
grote light
-
- Posts: 63
- Joined: Sat Dec 04, 2010 6:52 pm
- First and Last Name: Howard Demko
- Location: Grapeville,Pa.
grote light
Howard D.
- l palma
- Posts: 738
- Joined: Mon Sep 06, 2010 9:46 am
- First and Last Name: Lew Palma
- Location: Montague, N.J.
Re: grote light
Which model?
-
- Posts: 72
- Joined: Wed Jul 06, 2011 4:24 pm
- First and Last Name: David Grapes
- Location: Liberty Township, OH
Re: grote light
There should already be a hole for the rear light, left side of the removable seat support assembly. Don't recall the size, I picked up the grommet at an auto parts store, but the grommet needs to accomodate the thicker support assembly.
Showing wiring:
http://www.cngcoinc.com/pages/OemParts# ... 0098100011
Seat support assembly showing hole in side (part #4):
http://www.cngcoinc.com/pages/OemParts# ... 0098100029
The 100 I mounted the grote light on has fenders and the spring assists (overkill.. Brinly and IH), so the "proper" hole was occupied and I didn't want to drill any holes so I rotated the mount for the light to utilize the existing fender bolt.
This kind of shows how I mounted it (but had not routed the wire yet)
Good luck,
David
Showing wiring:
http://www.cngcoinc.com/pages/OemParts# ... 0098100011
Seat support assembly showing hole in side (part #4):
http://www.cngcoinc.com/pages/OemParts# ... 0098100029
The 100 I mounted the grote light on has fenders and the spring assists (overkill.. Brinly and IH), so the "proper" hole was occupied and I didn't want to drill any holes so I rotated the mount for the light to utilize the existing fender bolt.
This kind of shows how I mounted it (but had not routed the wire yet)
Good luck,
David
- l palma
- Posts: 738
- Joined: Mon Sep 06, 2010 9:46 am
- First and Last Name: Lew Palma
- Location: Montague, N.J.
Re: grote light
The spring assist bracket mounts under the frame, so yours needs to be fixed.then you can mount the light correctly.
-
- Posts: 72
- Joined: Wed Jul 06, 2011 4:24 pm
- First and Last Name: David Grapes
- Location: Liberty Township, OH
Re: grote light
Humm... I guess I missed something, I am not understanding where under the frame you mean, isn't there is a welded nut on the underside of frame for the bolt that holds the bracket on (and fender & seat support assembly), not sure how that works.l palma wrote:The spring assist bracket mounts under the frame, so yours needs to be fixed.then you can mount the light correctly.
(sorry about hijacking the thread, I did mean to help, not get help )
Thanks!
- l palma
- Posts: 738
- Joined: Mon Sep 06, 2010 9:46 am
- First and Last Name: Lew Palma
- Location: Montague, N.J.
Re: grote light
Hehe i was thinking about the wide frames..