Throttle shaft screws

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
User avatar
Farmallgray
Moderator
Posts: 1021
Joined: Mon Sep 06, 2010 7:39 am
First and Last Name: Todd Markle
Location: Spring Mills, Pa

Throttle shaft screws

Post by Farmallgray »

Having brain fade here. What size are the carb throttle shaft screws? I'm thinking 4-40 but I want to make sure.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray

Klapatta
Posts: 1139
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: Throttle shaft screws

Post by Klapatta »

Todd, they are 3-48 x 1/4".
McMaster- Carr has them in brass or stainless.
I'd go with the brass ones and here's a good reason why
DSCN0195.JPG
DSCN0195.JPG (105.39 KiB) Viewed 348 times
If a stainless one ever got loose it would cause all kinds of Hell inside :(
92453A092L.GIF
92453A092L.GIF (19.66 KiB) Viewed 348 times

PTWannaHave
Posts: 295
Joined: Wed Apr 11, 2012 12:39 pm
First and Last Name: Ben Michaud
Location: Richmond, Ontario

Re: Throttle shaft screws

Post by PTWannaHave »

I'll be installing these myself in the not too distant future; is blue loctite a good idea...?
PTWannaHave

wdeturck

Re: Throttle shaft screws

Post by wdeturck »

I only ever used red lock tight on them.

Post Reply