starting problem
-
dlcollins
- Posts: 12
- Joined: Sun Jan 04, 2015 4:24 pm
- First and Last Name: david collins
- Location: jamestown, KY
starting problem
guys I have a 104 that's driving me nuts, it starts and runs as long as you hold key over but soon as you release the key it shuts off. the wiring looks to be correct, I changed key switch, still the same problem. anyone know what could be causing this?
-
mrbrown
- Posts: 76
- Joined: Mon Apr 25, 2011 7:04 am
- First and Last Name: Mike Brown
- Location: cambridge, OH
Re: starting problem
Hello, i'd say you have another bad key switch. I hate old ing switchs, toggle switch and push buttons for me. Mike
-
SWilliams
- Posts: 806
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: starting problem
Either a bad switch or wrong switch. Does it have electric lift? Does it work?
You have a 3 pole switch. IH-60736-c3 Take a test light and connect one side to ground. Turn the switch on and see if you have power at the I(gnition) terminal.
You have a 3 pole switch. IH-60736-c3 Take a test light and connect one side to ground. Turn the switch on and see if you have power at the I(gnition) terminal.
Key sw, relays, safety sw..pdf- (4.08 MiB) Downloaded 185 times
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."