I'm finally getting back to working on my Brinly one hole plow and sleeve hitch dump cart. I tore them apart several years ago and cleaned them using electrolysis and epoxy primed them. I also filled some rust pits and some of the parts are ready paint. So I'm starting to think about decals. I found a site called redoyourhorse.com;
http://www.redoyourhorse.com/brinly-decals/
This is a start and they will custom print your serial number but they are a little pricey and there are more there than I need and some I don't.
I also found these;
http://wfmachines.com/advertisers/buske.html
Again a little pricey and no option for custom serial #.
I was wondering if any of you had found any other sources for any of these decals. I have a friend who does vinyl signs and wraps and I have had him do some other stuff for me. If I don't find a source who already makes what I need, I'll just have hime make them for me.
Brinly implent restoration and decal sources
- Farmallgray
- Posts: 1021
- Joined: Mon Sep 06, 2010 7:39 am
- First and Last Name: Todd Markle
- Location: Spring Mills, Pa
Brinly implent restoration and decal sources
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
http://www.youtube.com/user/farmallgray
- chzuck
- Posts: 364
- Joined: Tue Sep 07, 2010 2:51 pm
- First and Last Name: Charlie Zuck
- Location: Elizabethtown, PA
Re: Brinly implent restoration and decal sources
I make my own decals. I buy either water slide paper or vinyl and print my own, then coat them with a UV protector. Of course you need a good copy to start with or clean up a nice photo of one.
I know what you mean by pricey. Years ago I had a fellow clean up a scan of one I had and it cost over $11 for a 5" circular vinyl decal. 8.5 x 11 decal paper is around $2.00 a sheet.
I know what you mean by pricey. Years ago I had a fellow clean up a scan of one I had and it cost over $11 for a 5" circular vinyl decal. 8.5 x 11 decal paper is around $2.00 a sheet.
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow